Monessen Hearth DBX24C DFX & DBX Series Vent Free Fireplaces, Brass Louvers, Firebricks, 33D4047

DFX & DBX Series Vent Free Fireplaces OPTIONAL ACCESSORIES

Forced Air Kit

If you are installing the forced air kit (Models BLO24-T, BLO24-TB or BLOT), see the installation instructions provided with the kit for electrical wiring requirements or the blower installation sec- tion.

Model DFX24C uses blower model BLO24T.

Model DFX32C uses blower model BLOT.

Model DBX24C uses blower model BLO24TB.

The firebox must be connected to main power supply at time of firebox installation. The blower must be installed prior to the installation of the unvented heater. The electrical connections must be made before the firebox is framed and enclosed in the finished walls.

Brass Louvers

Optional brass louvers may be installed in place of the factory installed black louvers. See installa- tion instructions provided with the brass louvers.

Firebricks

Optional firebrick kits can be installed. See installation instructions provided with kit or Page 33.

CAUTION

Electrical connections should only be performed by a qualified, licensed electrician, main power must be off when connecting to main electrical power supply or performing service.

32 33D4047