Compaq 386 manual Advanced Diagnostics Error Codes

Maintenance and Service Guide 5-25

Table 5-2. Advanced Diagnostics Error Codes Continued

Error		Recommended
Code	Description	Action
-xx		The following steps apply to error codes 1700-xx
		through 1799-xx:
61	Failed uncorrectable ECC* error.
		1. Run SETUP.
62	Failed correctable ECC* error.
		2. Check the switch settings and jumper positions on the
63	Failed soft error rate.
		controller board and retest (see Chapter 8).
65	Exceeded maximum bad sector	3. Replace the fixed disk drive signal and power cables
	per track.	and retest.
		4. Replace the controller board and retest.
66	Failed initial drive parameter.
		5. Replace the fixed disk drive and retest.
67	Failed to write long.	6. Replace the system board and retest.

68Failed to read long.

69Failed to read drive size from controller.

70Failed translate mode.

71Failed nontranslated mode.

72Bad track limit exceeded.

73Previously exceeded bad track limit. *Error Correction Code

Continued...

Addendum 108431-001 (11-88) to Manual No. 108033-003