7-36 Chapter 7, Removal and Replacement Procedures
To replace a mass storage device in drive posi- tions A or D, reverse Steps 1 through 4 of the preceding removal procedures. When you recon- nect the power cable, follow the guidelines for power cable connections in Table
Table 7-2. Power Cable Connections for Drive Positions A and D
|
| System |
Drive |
| Board |
Position | Mass Storage Device | Connector |
A | Any mass storage device | J112 |
|
|
|
D | Any diskette drive | J111 |
|
|
|
| Any fixed disk drive | J110 |
| Any fixed disk drive | J111 |
| backup |
|
Removal and Replacement Procedures for Drive Positions B or C
To remove a mass storage device from drive positions B or C, follow these steps:
1.Complete the removal procedures in the following sections:
a.7.2 MONITOR
b.7.3 KEYBOARD
c.7.5 PREPARING THE SYSTEM UNIT FOR THE INTERNAL REMOVAL AND REPLACEMENT PROCEDURES
d.7.6 SYSTEM UNIT COVER AND INTERNAL CONFIGURATION
