Compaq 386 manual Expansion Boards, Location of the Reinforcement Bracket

Maintenance and Service Guide 7-19

7.10 EXPANSION BOARD(S)

The following procedures apply to each board.

To remove an expansion board, follow these steps:

1.Complete the removal procedures in the following sections:

a.7.2 MONITOR

b.7.3 KEYBOARD

c.7.5 PREPARING THE SYSTEM UNIT FOR THE INTERNAL REMOVAL AND REPLACEMENT PROCEDURES

d.7.6 SYSTEM UNIT COVER AND INTERNAL CONFIGURATION

2.Locate and remove the reinforcement bracket by removing the rear screw first and then the front screw (Figure 7-19). This sequence prevents the reinforcement bracket from rotating.

Figure 7-19.Location of the Reinforcement Bracket.