3.2 HOW TO RUN SETUP
To run SETUP, follow these instructions:
1.Insert either ADVANCED DIAGNOSTICS or USER DIAGNOSTICS diskette into drive A.
2.Turn the diskette drive latch to engage the drive.
3.Turn on the computer and monitor. If the computer is already on, reset the system.
The system runs POST, counting and displaying the amount of memory and checking the various system components.
4.Follow the instructions on the screen as the program sets the system configuration.
NOTE: The F1 function key can be used anytime during SETUP to access HELP.
5.When SETUP is complete, select EXIT and reset the system.
