Maintenance and Service Guide |
Format a Diskette
The ADVANCED DIAGNOSTICS program requires that a diskette be formatted for each diskette drive being tested. This utility is not the same as the operating system FORMAT command. A diskette formatted for diagnostics can be used for diagnostics only, unless it is reformatted using the operating system.
NOTE: To fully test a diskette drive, use the highest capacity media intended for each drive.
Run the SETUP Program
This selection runs the SETUP program to enter all system information into the system configu- ration memory. For more information on the SETUP program, refer to Chapter 3, SETUP PROGRAM.
Clear Configuration and Run the SETUP Program
This selection clears the system configuration memory before invoking the SETUP program. It may be used to return all configuration options to the default setting. This is particularly useful if the computer has an incorrect setting in the configuration memory.
Display ROM Versions
This selection displays information about the
