Compaq 386 manual Power Fuse, Removing the Fuse Holder

7-6 Chapter 7, Removal and Replacement Procedures

7.4 POWER FUSE

New power fuses are available in the fuse kit (part no. 102930-001). The power fuse is inside a fuse holder and casing on the back of the system unit.

To remove the power fuse, follow these steps:

1.Turn OFF the computer.

2.Insert a flat-bladed screwdriver along the bottom edge of the fuse holder and lift it outward with enough pressure to release it from the casing (Figure 7-6).

Figure 7-6.Removing the Fuse Holder.