Maintenance and Service Guide |
7.8 BATTERY
The battery is secured to the system unit chassis with a VELCRO strip and is connected to the system board by a small cable and connector. Disconnecting the battery removes the time, date, and system configuration information from the system memory. Any time you remove the battery, you must rerun the SETUP program.
WARNING
This procedure is to be performed by Autho- rized COMPAQ Computer Dealers only.
To remove the battery, follow these steps:
1.Complete the removal procedures in the following sections:
a.7.2 MONITOR
b.7.3 KEYBOARD
c.7.5 PREPARING THE SYSTEM UNIT FOR THE INTERNAL REMOVAL AND REPLACEMENT PROCEDURES
d.7.6 SYSTEM UNIT COVER AND INTERNAL CONFIGURATION
