Compaq 386 manual Fixed Disk Drive Retaining Screws

7-52 Chapter 7, Removal and Replacement Procedures

4.Remove the three retaining screws securing the fixed disk drive to the expansion unit (Figure 7-52).

Figure 7-52.Fixed Disk Drive Retaining Screws.

5.Carefully slide the drive out of the expansion unit housing.

NOTE: A terminating resistor must be in- stalled on the 300-megabyte fixed disk drive if the following is true:

□The drive is in a 300-megabyte expansion unit.

□The drive is the secondary drive in a 600-megabyte expansion unit.

Addendum 108431-001 (11-88) to Manual No. 108033-003