Compaq 386 manual External Interface Adapter Board, Removing Power Cables

Maintenance and Service Guide 7-55

External Interface Adapter Board

To remove the external interface adapter board from the expansion unit complete the following steps:

1.Complete the steps at the beginning of this section.

2.Disconnect the 20- and 34-pin signal cables from the external interface adapter board (Figure 7-56).

3.Disconnect the universal drive power and power supply cables from the external inter- face adapter board (Figure 7-57).

Figure 7-57.Removing Power Cables.

Figure 7-56.Removing the 20- and 34-Pin Signal Cables.

Addendum 108431-001 (11-88) to Manual No. 108033-003