Compaq 386 manual Jumper Positions and Switch Settings

7-56 Chapter 7, Removal and Replacement Procedures

4.Remove the external interface adapter board.

NOTE: Inspect new external interface adapter board for shipping damage prior to installation.

To replace the external interface adapter board, reverse steps 1 through 4.

NOTE: For internal or external switch settings for the 300-/600-Megabyte Fixed Disk Drive Expansion Unit, see Chapter 8,

JUMPER POSITIONS AND SWITCH SETTINGS.

For internal or external cable connec- tions and configurations for the

300-/600-Megabyte Fixed Disk Drive Expansion Unit, see Chapter 9, MASS STORAGE CONFIGURATIONS.

Addendum 108431-001 (11-88) to Manual No. 108033-003