3.Install the external fixed disk drive con- troller. Refer to Chapter 7, REMOVAL AND REPLACEMENT PROCEDURES.
4.Follow the instructions in Chapter 3, SETUP PROGRAM, for running the SETUP program to initialize the CMOS memory to reflect the number of fixed disk drives currently installed.
5.Insert the EXTDISK diskette into drive A and restart the computer.
6.Copy the files with .DSK extensions from the root directory of the EXTDISK diskette to the working copy of the NetWare AUXGEN diskette.
□If you are running the Novell NETGEN program from a fixed disk drive or network, you may want to create a subdirectory for the files with .OBJ extensions found in the root directory or the EXTDISK diskette. If so, create a directory named “DSK_DRV_.203” and copy the files with .OBJ extensions into the directory.
□If you are running the Novell NETGEN program from diskettes, the program prompts you to “Insert the disk DSK_DRV_.203 in any drive.” At this point, insert the EXTDISK diskette into the diskette drive.
□If you are installing NetWare V2.1, you must apply a patch to several files. (No patches are required for V2.11.) After copying the following files to a separate workspace, apply the COMP21 patch:
COMPSURF.OBJ | (from |
| diskette) |
DISKED.OBJ | (from |
| diskette) |
INSTOVL.OBJ | (from |
| diskette) |
The following files should appear in the root directory of the EXTDISK diskette:
COMP21.BAT | Batch file to run |
| patch |
COMP21.DOC | Documentation |
| for patch |
SFTPATCH.EXE | Main patch |
| program |
