Compaq 386 manual Fixed Disk Drive Unit

Maintenance and Service Guide 7-51

Fixed Disk Drive Unit

To remove a fixed disk drive from an expansion unit, perform the following steps.

1.Complete the steps at the beginning of this section.

2.Disconnect the 20- and 34-pin signal cables from the external interface adapter board in the fixed disk drive expansion unit (Figure 7-50).

3.Disconnect the universal drive power cable from the external interface adapter board in the fixed disk drive expansion unit (Figure 7-51).

Figure 7-51.Removing Power Cables from an External

Interface Adapter Board.

Figure 7-50.Removing Signal Cables from an External

Interface Adapter Board.

Addendum 108431-001 (11-88) to Manual No. 108033-003