SMC Networks SMCWUSBT-G manual Infrastructure Access Point Mode Profile Configuration

Wireless USB 2.0 Adapter

Infrastructure (Access Point) Mode Profile Configuration

To configure a profile in infrastructure (access point) mode, change the Network Type in the Advanced tab. For access point mode, modify the settings:

„Transmit Power Level

„Power Save Mode

„802.11b Preamble (if using 802.11b)

„Wireless Mode

„802.11a Authentication Mode (if using 802.11a)

Ad Hoc Mode

In ad hoc mode, a wireless network adapter works within an independent basic service set (IBSS), as illustrated here. All stations communicate directly with other stations without using an access point (AP).

Ad Hoc Mode Profile Configuration

To configure a profile in ad hoc mode, change the Network Type in the Profile Management's Advanced tab. For ad hoc mode, modify the settings:

„Network Name (on General Tab)

„Transmit Power Level

„802.11b Preamble (if using 802.11b)

„Wireless Mode When Starting an Ad Hoc Network

24