Samsung HTH5500 user manual ĞĞ Wireless Automatic, ĞĞ Wireless Manual, Enter manually

Settings

ĞĞWireless - Automatic

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 19)

1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.

Network Settings

4. Enter your wireless network or wireless router's

name.

●● Enter numbers directly using the number

buttons on your remote control.

●● Enter letters by selecting a letter with the

▲▼◀▶ buttons, and then pressing the v

button.

●● To display capital letters (or redisplay lower

case letters if capital letters are displayed),

select , and then press the v button.

Select your network type.

Network Type Wireless

Wireless network

✓ si-ap

MIC

KIMING_VTOWER

WPS(PBC) Search

You can connect your BD Home Theater to the

internet. Please select which wireless network to use.

●● To display symbols and punctuation, select

123#&, and then press the v button. To

redisplay letters, select 123#&, and then

press the v button.

When finished, select Done, and then press the

v button.

5. On the Security method screen that appears,

use the ▲▼ buttons to select the network's

Security method, and then press the

m Move " Select ' Return

2.Select the desired network, and then press the

vbutton.

3.On the Security screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◀▶ buttons, and then pressing v button.

4.When finished, select Done, and then press the

vbutton. The product verifies the network connection and then connects to the network.

✎✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

ĞĞWireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 19)

1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.

2.Scroll through the list, select the desired network or Add Network, and then press the v button.

3.If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4.

	v
	button. On the next screen, enter your
	network's security code or pass phrase.
	●● Enter numbers directly using the number
	buttons on your remote control.
	●● Enter letters by selecting a letter with the
	▲▼◀▶ buttons, and then pressing the v
	button.
	When finished, select Done, and then press
	the v button. The product searches for the
	network.
6.	The Network connection fail screen appears.
	Use ◀▶ buttons to select IP Settings, and then
	press the v button.
7.	Select the IP Setting field, and then set it to
	Enter manually.
8.	Select a network parameter to enter (IP
	Address, for example), and then press v
	button. Use the number keypad on your remote
	control to enter the numbers for the parameter.
	You can also enter numbers using the ▲▼
	buttons. Use the ◀▶ buttons on the remote
	control to move from entry field to entry field
	within a parameter. When done with one value,
	press the v button.
9.	Press the ▲ or ▼ button to move to another
	parameter, and then enter the numbers for that
	parameter following the instructions in Step 8.
10.	Repeat Steps 8 and 9 until you have filled in all
	parameters.

20 - English