Installing the Speakers on the Tallboy Stand
02
*
*
1.Turn the Stand Base
2.Insert four small screws clockwise into the four holes marked using a screwdriver as shown in the illustration.
3.Connect the upper Speaker to the assembled Stand.
4.Insert another large screw clockwise into the hole on the rear of the speaker using a screwdriver.
1 |
|
| Stand |
| Base |
| Stand |
3 | Speaker |
|
Stand
Conne
Connecting The Speakers
1.Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal
3. Connect the connecting plugs to the back of the product by matching the | Black | Red |
colours of the speaker plugs to the speaker jacks. |
In case of HT-C450
Centre Speaker
Front Speaker (R) | Front Speaker (L) |
|
| VIDEO |
|
| OUT |
|
DIGITAL | HDMI OUT |
|
AUDIO IN |
| |
OPTICAL |
|
|
| AUX IN | COM |
|
| |
Rear Speaker (R) | Rear Speaker (L) |
Subwoofer
* Refer to page 16 for the speakers of