C.2 MediaOne
1.Be sure you have a computer that is already set up to access MediaOne and that the MAC address of the Ethernet adapter used in this computer is the one registered with your ISP. Please use this computer and Ethernet adapter to perform the following steps.
2.Connect the Ethernet adapter to any LAN port of the SMC7004BR and connect the cable modem to the WAN port of SMC7004BR.
3.Power on the SMC7004BR. After it is working, please run WINIPCFG in your Windows platform and release and renew the IP address manually. This step ensures that your PC obtains the correct TCP/IP setting from the newly configured SMC7004BR.
4.Log in as system administrator and click "Primary Setup."
5.Configure the WAN type as "Dynamic IP Address."
6.Save the setting for "Primary Setup."
7.Click "Toolbox" and check the WAN's MAC Address.
8.Click "Clone MAC" button. It will copy the MAC address of the Ethernet adapter used in your computer and change the WAN's MAC Address.
9.Reboot SMC7004BR.
NOTE: You can restore the WAN's MAC Address by clicking the "Restore MAC" button.