Introduction, Installation & Placement | Simaudio W-8 instruction

MOON W-8 Dual-Mono Power Amplifier

Introduction

Your MOON W-8Dual-Mono Power Amplifier incorporates many significant design features to achieve its “world-class” level of performance. This is an abbreviated list of the more important features:

Proprietary “Lynx” Technology which eliminates feedback. The results are: Real-time amplification is achieved since interactions from the speaker back to the amplifier are virtually eliminated; More accurate musical reproduction with respect to tonality; Virtually non-existent transient intermodulation distortion (which is far more degrading to sonic performance than harmonic distortion); The elimination of common phase errors resulting from feedback.

A custom proprietary toroidal transformer design with lower magnetic, electrical and thermal loss, yielding an improved power transfer and lower regulation factor, resulting in increased current speed and better dynamics.

Fully balanced differential circuitry up to the output stage.

Output stable to any known speaker impedance.

Class A output to 5 watts for greater efficiency.

An oversized power supply.

An exceptionally short signal path for a faster transient response.

Precision matched, fully decoupled Bipolar output devices yielding superb linearity across the entire audio spectrum.

A high damping factor which yields superior musical dynamics, improved signal speed and refined timbre accuracy.

Extremely rigid chassis construction to minimize the effects of external vibrations.

Accurate matching of the very finest high quality electronic components.

Pure copper circuit board tracings with extremely low impedance characteristics.

Designed to be powered up at all times for optimal performance.

Installation & Placement

The MOON W-8Dual-Mono power amplifier is both powerful and heavy. It requires reasonable ventilation to maintain an optimum and consistent operating temperature, especially since it will radiate heat when driven hard. Consequently, it should be placed in a location with empty space around it for proper heat dissipation. You should never place another component on top of this amplifier. As well, the amplifier should be placed on a solid level surface. You should avoid placing it near a heat source or inside a closed cabinet that is not well ventilated as this could compromise the amplifier’s performance and reliability. The W-8uses two large toroidal transformers in its power supply; even though they are well shielded, you should not place this amplifier too close to source components sensitive to EMI, such as turntables, phono preamplifiers and CD Players.

Once you have decided on a location for your W-8, you should install the four (4) pointed screw-on cones into the threaded holes located on the bottom of the four (4) corner posts of the chassis. These tips will easily scratch most surfaces, therefore it’s advisable to follow these steps: Place your W-8on a soft surface (i.e. carpet) and carefully turn it so that it rests on its side. Screw one cone onto each of the four posts. Carefully move your W-8to it’s pre-determined location.

In the event that the surface you have chosen isn’t perfectly level, each of the four (4) cones of your W-8are height adjustable; carefully using your fingers, you can either raise each leg by turning the cone underneath clockwise, or lower each leg by turning it counterclockwise.

____________________________________________________________________________________

Introduction / Installation Tips

W-8 specifications

The Simaudio W-8 is a high-end power amplifier that exemplifies exceptional audio performance and craftsmanship, catering to audiophiles seeking uncompromised sound quality. As a part of Simaudio's Moon series, the W-8 is engineered to deliver power and precision, making it an ideal choice for serious music enthusiasts.

One of the hallmark features of the W-8 is its impressive power output. With an ability to deliver 250 watts per channel into an 8-ohm load, and 500 watts into 4 ohms, the W-8 provides ample headroom to drive even the most demanding speaker systems. This power is coupled with a very low distortion level, ensuring that the integrity of the audio signal is maintained regardless of volume levels.

The W-8 incorporates Simaudio’s proprietary technologies to enhance performance. One such technology is the use of fully balanced, differential circuitry, which significantly reduces noise and distortion, delivering a crystal-clear sound. Additionally, the W-8 employs a class A/AB amplification design that combines the efficiency of class AB operation with the finesse of class A. This hybrid approach allows for linear performance across the audio spectrum while preserving dynamic range.

Another notable characteristic of the Simaudio W-8 is its robust build quality. Housed in a sleek aluminum chassis, the amplifier features an elaborate thermal management system that ensures optimal performance during extended listening sessions. With a dual mono design and separate power supplies for each channel, the W-8 minimizes crosstalk and enhances stereo imaging.

In terms of connectivity, the amplifier provides extensive options, including XLR and RCA inputs, as well as speaker binding posts that accommodate a variety of cables. This versatility ensures that the W-8 can seamlessly integrate into various audio setups, allowing for greater flexibility and customization.

Moreover, Simaudio places a strong emphasis on user experience, which is evident in the W-8's intuitive layout and operational simplicity. Its understated aesthetic ensures it fits well into any audio system while also standing out as a statement piece.

In conclusion, the Simaudio W-8 is an amplifier that excels in performance, design, and technology. Its powerful output, advanced circuitry, and premium build quality make it a standout choice for audiophiles who desire an amplifier that can deliver a truly immersive listening experience. Whether for music production or refined listening, the W-8 stands as a testament to Simaudio's commitment to high-fidelity audio.