•Check the USB cable connection.
•Check the LED light on the External Hard Drive.
•Check the power supply to D3 Station External Hard Drive.
Ticking noise is an indication of insufficient power.
•If the drive is not being recognized, try plugging it into a different USB port.
Q1. File transfer takes too long.
A1. - USB 3.0
To use the Hard Driver at its Maximum speed, you need a PC or a Host Card that supports
USB 3.0 interface and USB 3.0 Cable.
Q2. The actual storage capacity of D3 Station External Hard Drive is different than the capacity shown on the packaging.
A2. Type of file system used for the drive, partitioning arrangement, type of operating system, and various other factors can affect the actual storage capacity displayed by your computer.
(1MB=1,000,000bytes and 1GB=1,000,000,000bytes and 1TB=1,000,000,000,000bytes.)
Q3. I connected my D3 Station External Hard Drive, and the computer seems to recognize it, but the drive won’t show up under Windows Explorer.
A3. D3 Station External Hard Drive is by default formatted to NTFS and will work normally when you connect it
to your computer. However, if the partition has been erased or the file system has been changed to a one that’s not recognized by Windows, the drive will not appear under Windows Explorer. Try formatting the drive to FAT32 or NTFS. (Caution : Formatting will erase all data stored in the drive.)
Q4. I am using Windows XP and cannot format the drive to FAT32.
A4. Windows operating systems that followed Windows NT have limited FAT32 formatting to 32GB.
Therefore, if you wish to format your D3 Station External Hard Drive to FAT32, you will need to download a format utility from our website.
(Caution : Formatting will erase all data stored in the drive. We recommend that you back up your data before proceeding.)
Q5. My computer will not boot up properly.
A5. If you boot up your system with a D3 Station External Hard Drive connected to the computer, it’s possible that your system’s BIOS is attempting to boot from the External Hard Drive.
Change the BIOS booting sequence or disconnect the External Hard Drive from the system and then try booting again.
Q6. I am using a Mac, and I can’t copy files.
A6. If the drive has been formatted to NTFS, data stored in the drive can only be read by Mac systems. To use the drive on Mac OS X operating systems, use NTFS for Mac Driver or reformat your drive.
NTFS for Mac Driver : Refer to page 10
Reformat : Refer to page 20
D3 Station External Hard Drive | 19 |