Seagate ST9120411ASG Physical characteristics, Seek time, Typical seek times, Drive specification

Page 13

2.6Physical characteristics

Drive specification

 

 

 

 

Height

(mm)

9.5 +/-0.2

 

(inches)

0.374 +/-0.0078

 

 

 

Width

(mm)

69.85 +/-0.249

 

(inches)

2.75 +/-0.0098

 

 

 

Length

(mm)

100.3 +/-0.25

 

(inches)

3.95 +/-.010

 

 

Typical weight

110 grams

 

ST9320421AS

 

ST9320421ASG

0.238 pounds

 

ST9250421AS

 

 

ST9250421ASG

 

 

ST9200421AS

 

 

ST9200423ASG

 

 

ST9160411AS

105 grams

 

ST9160411ASG

0.227 pounds

 

ST9120411AS

 

 

ST9120411ASG

 

 

ST980411AS

 

 

ST980411ASG

 

 

 

 

2.7Seek time

Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:

•Track-to-track seek time is an average of all possible single-track seeks in both directions.

•Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead.

Table 2: Typical seek times

Typical seek times (msec)

Read

 

 

Track-to-track

1.0

 

 

Average

11.0

 

 

Full-stroke

22.0

 

 

Average latency

4.17

 

 

Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications.

Momentus 7200.3 SATA Product Manual, Rev. C

7

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Momentus 7200.3 Sata Page Contents Momentus 7200.3 Sata Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Specification summary table Drive specificationsAFR Formatted capacity LBA modePhysical organization Default logical geometryRecording and interface technology Cylinders Read/write heads Sectors per track 16,383Drive specification Physical characteristicsSeek time Typical seek timesStart/stop times Power specificationsConducted noise Typical current profileVoltage tolerance Power management modes Power-management modesActive mode Idle modeEnvironmental specifications Acoustics Electromagnetic immunity Free Fall Protection featureReliability Radio frequency environmentsAgency certification Safety certificationElectromagnetic compatibility Korean BCCFCC verification Corrosive environment Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS DirectivePage Momentus 7200.3 Sata Product Manual, Rev. C Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewMomentus 7200.3 Sata Product Manual, Rev. C Signal Serial ATA connector pin definitionsSerial ATA Sata interface Segment Pin Function DefinitionP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsCommand name Command code in hex ATA-standard security commands Identify Device commandWord Description Value XxxxH Xx7FH Description if bit is set to Bit Set Features command values Set Features commandA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Warranty Support MySeagate Spp.seagate.com Seagate Technology support servicesInternet Presales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceCall Center Toll-free Direct dial Index ITE TPI Momentus 7200.3 Sata Product Manual, Rev. C Page Seagate Technology LLC
Related manuals
Manual 46 pages 47.63 Kb Manual 44 pages 3.42 Kb

ST9120411AS, ST9120411ASG, ST9250421AS, ST9750420AS, ST9160411AS specifications

Seagate has long been a prominent name in the storage industry, recognized for delivering reliable hard drives that cater to a variety of computing needs. The Seagate ST9200421AS, ST9160411ASG, ST980411ASG, ST9320421ASG, and ST9320421AS are notable hard drives that showcase the brand's commitment to performance and efficiency.

The ST9200421AS is a 2.5-inch SATA hard drive that boasts a storage capacity of 200GB. With a spindle speed of 5400 RPM, this model is optimized for low power consumption while maintaining adequate performance for everyday computing tasks. Its 8MB cache enhances data transfer rates, making it suitable for basic computing environments such as entry-level laptops.

Another model, the ST9160411ASG, also operates at a speed of 5400 RPM but offers a slightly larger storage capacity of 160GB. It incorporates advanced error correction technologies that improve data integrity and reliability. This drive is ideal for users looking to upgrade their existing storage without sacrificing battery life or performance in mobile devices.

The ST980411ASG steps up the capacity game with 160GB of storage as well but features Seagate's PowerSave technology that helps extend battery life in laptops. This is particularly beneficial for mobile users who require dependable storage while on the move. Combined with a 5400 RPM speed and 8MB cache, it balances performance with energy efficiency.

The ST9320421ASG offers a more substantial storage option of 320GB, matching the performance characteristics of its predecessors with a 5400 RPM spin rate. This drive includes features like QuietStep technology, which minimizes noise for a smoother user experience, making it excellent for quiet environments and multimedia applications.

Lastly, the ST9320421AS follows suit with similar specifications, catering to users who prioritize additional capacity alongside reliability. This model is ideal for users needing a dependable yet spacious storage solution for their laptops or compact desktops.

Overall, the Seagate ST9200421AS, ST9160411ASG, ST980411ASG, ST9320421ASG, and ST9320421AS hard drives exemplify the brand's innovation and commitment to quality. With features designed to enhance performance, efficiency, and user experience, these drives continue to be a solid choice for those seeking reliable storage solutions in various computing environments. With their varying capacities and features, users have the flexibility to select a model that best fits their storage needs while enjoying the reliability that Seagate is known for.
Top Page Image Contents