Seagate ST11900W/WD/WC, ST12400W/WD/WC manual Drive installation, Disc drive mounting

Page 35

Hawk 2 (Wide bus) Family Install Guide, Rev. C 33

Drive installation

This section describes the physical mounting of the drive in the host cabinet and the logical installation as a system member, which is called drive setup.

Disc drive mounting

Do not touch the connector pins or any PCB compo- nents without observing static-discharge precautions. Always handle the drive by the frame only.

The drive may be mounted in any orientation.

•See notes on Figures 4 and 5 pertaining to proper drive installation.

•Verify that all connections between the drive and the host system are correctly installed. Most cables have a contrasting color stripe indicating pin 1. Pin 1 on the drive I/O, J1-auxiliary DC power connectors are indicated in the figures in the Initial Set-up Informa- tion section.

•Verify option select and drive ID select jumpers. See Drive Configuration section.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents
Hawk 2 Family Wide Bus ST12400W/WD/WC ST11900W/WD/WC ContentsHawk 2 Wide bus Family Install Guide, Rev. C Electromagnetic interference EMI con- siderations IntroductionPage Before you begin Page Hawk 2 Wide bus Family Install Guide, Rev. C Safety instructions Sicherheitsanleitung Installation Overview Page Product repair information Product repair and return information SeaFONE 408/438-8222 Technical support servicesSeaFAX 408/438-2620 SeaBOARD SeaTDD 408/438-5382Modem Maximum Location Number Baud Rate BBSOperating environment Drive specificationsPower requirements Versorgungsspannungen Seek time ms typProduct Hawk 2 family wide Information ST11900W/WC ST11900WD Page Scsi interface cable connection Initial setup informationDC Power connection Scsi address selection DC power connection, 68 pin Scsi I/O connectorTerminator resistor packs Write precompensation and reduced write current Optional parity bit enableRead/Write head auto-park Scsi I/O ST12400W/WD family 68 pin Scsi I/O drives Drive configurationST12400WC family 80 pin Scsi I/O drives See PCB Cath Hawk 2 Wide bus Family Install Guide, Rev. C RES Hawk 2 Wide bus Family Install Guide, Rev. C Not applicable to WC model drives SSP Disc drive mounting Drive installation040 in .02 mm Hawk 2 Wide bus Family Install Guide, Rev. C Grounding Scsi interface drives Hawk 2 Wide bus Family Install Guide, Rev. C
Top Page Image Contents