Setup
Audio
Speaker Setting
Settings | Speaker Setting |
|
| ||
|
|
| |||
Display | Level |
|
| ||
Audio | Distance |
|
|
| |
System | Test tone | : | Off | ||
Network | |||||
|
|
|
| ||
Language |
|
|
|
| |
Security |
|
|
|
| |
General |
|
|
|
| |
Support | <Change | rReturn | |||
|
|
|
|
|
Level
You can adjust the balance and level for each speaker.
Adjusting Front/Center/Surround /Subwoofer Speaker Level
•The volume level can be adjusted in steps from +6dB to -6dB.
•The sound gets louder as you move closer to +6dB and quieter as you get closer to
Settings | Level |
|
|
| |
|
|
|
| ||
Display | Front L | : | ◄ 0 dB | ||
Audio | Front R | : | 0 dB | ||
Center | : | 0 dB | |||
System | |||||
Surround L | : | 0 dB | |||
Network | Surround R | : | 0 dB | ||
Subwoofer | : | 0 dB | |||
Language | |||||
Test Tone | : | Off | |||
Security |
|
|
|
| |
General |
|
|
|
| |
Support | <Change |
| rReturn | ||
|
|
|
|
|
Distance
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, center, surround and subwoofer speakers.
•You can set the Speaker Distance between 1ft (0.3m) and 30ft (9.0m).
Settings |
| Distance |
|
|
|
|
|
|
|
| |
Display |
| Front L | : ◄ 10ft (3.0m) | ||
Audio |
| Front R | : | 10ft (3.0m) | |
| Center | : | 10ft (3.0m) | ||
System |
| Surround L | : | 10ft (3.0m) | |
Network |
| Surround R | : | 10ft (3.0m) | |
| Subwoofer | : | 10ft (3.0m) | ||
Language |
| ||||
| Test Tone | : | Off | ||
Security |
|
|
|
|
|
General |
|
|
|
|
|
Support |
| <Change | rReturn | ||
|
|
|
|
|
|
|
|
|
|
|
|
Test Tone
Use the Test Tone feature to check the speaker connections.
Press the ◄ or ► button to select All.
• A test tone will be sent to Front L Center Front R Surround R Surround L Subwoofer in order so you can make sure the speakers are set up correctly.
To stop the test tone, press the ◄ or ► button to select Off.
Settings | Speaker Setting |
|
| |
|
|
| ||
Display | Level |
|
|
|
Audio | Distance |
|
|
|
System | Test Tone | : ◄ | All | |
Network |
|
|
|
|
Language |
|
|
|
|
Security |
|
|
|
|
General |
|
|
|
|
Support | <Change | rReturn | ||
|
|
|
|
|
|
|
|
|
|
✎NOTE
When HDMI Audio is ON, audio is produced through the TV speakers. The Test Tone function is not available.