Seagate ST9500622NS, ST9500621NS, ST9500620NS, ST9250610NS, ST9250612NS manual Agency certification

Page 27

3.13Agency certification

3.13.1Safety certification

The drives are recognized in accordance with UL 60950-1 as tested by UL, CSA 60950-1 as tested by CSA, and EN60950-1 as tested by TUV.

The security features of Self-Encrypting Drive models are based on the “TCG Storage Architecture Core Spec- ification” and the “TCG Storage Workgroup Security Subsystem Class: Enterprise_A” specification with addi- tional vendor-unique features as noted in this product manual.

3.13.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Communications Commission, Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab.

Family name:

Constellation.2 Serial ATA

Certificate number:

STX- ST91000640NS (B)

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).

3.13.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

Constellation.2 Serial ATA Product Manual, Rev. B

21

Image 27
Contents ST91000642NS ST9500622NS ST9250612NS Standard Models Self-Encrypting Drive ModelsSED Fips 140-2 Models Revision Date Sheets affected or comments Revision historyContents Serial ATA Sata interface List of Figures Page Seagate Online Support and Services Seagate Technology support servicesIntroduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specifications summary for 1TB, 500 and 250 GB models Constellation.2 Serial ATA Product Manual, Rev. B Recording and interface technology Default logical geometryLBA mode Formatted capacityTypical seek times ms Read Write Physical characteristicsSeek time Start/stop timesStandby mode Power specificationsPower consumption Spinup powerRegulation +10/-7.5% Watts 1000GB drive Standard & SED model DC power requirementssPower ST91000640NS Parameter 0GB Voltage +12ST9500620NS Parameter 0GB Voltage +12 500GB drive Standard & SED model DC power requirementsST9250610NS Parameter 0GB Voltage +12 250GB drive Standard & SED model DC power requirementsTypical current profiles Voltage tolerance Conducted noiseSleep mode Power-management modesActive mode Idle modePower Condition Name Power Condition ID Description PowerChoice is invoked using one of two methodsTemperature a. Operating Environmental limitsRelative humidity Nonoperating shock Effective altitude sea levelShock Operating shockNonoperating vibration AcousticsVibration Operating vibrationTest Description Performance level Reference standard Electromagnetic immunityReliability Radio frequency environmentsAgency certification Product warranty Environmental protectionReference documents Shipping StorageProduct repair and return information China Restriction of Hazardous Substances RoHS Directive Corrosive environmentHandling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewAir flow CoolingAbout Fips PurposeLevel 2 security Data encryption Controlled accessAdmin SP About self-encrypting drivesData bands Default passwordRandom number generator RNG Drive lockingCryptographic erase Authenticated firmware downloadPower requirements Supported commandsHot-Plug compatibility Serial ATA Sata interfacePin Function Definition Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions SignalSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordWord Set Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Index ITE Page Constellation.2 Serial ATA Product Manual, Rev. B Page Disc Drive, Scotts Valley, California 95066-4544, USA