Samsung HT-A100 Select the appropriate function, Been forgotten, Return to the default values

troubleshooting

SYMPTOM	Check/Remedy
• Disc is rotating but no	• Is the TV power on?
picture is produced.	• Are the video cables connected properly?
• Picture quality is poor and	• Is the disc dirty or damaged?
picture is shaking.	• A poorly manufactured disc may not be playable.
Audio language and subtitles do	• Audio language and subtitles will not work if the disc does
not work.	not contain them.
Menu screen does not appear	• Are you using a disc that does not contain menus?
even when the menu function is
selected.
Aspect ratio cannot be changed.	• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER
	BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be
	seen in 4:3 ratio only. Refer to the DVD disc jacket and then
	select the appropriate function.

•The main unit is not working. • Turn off the power and hold the STOP (@) button on the

(Example: The power goes out remote control for longer than 5 seconds. or strange noise is heard.)

• The DVD player is not working	Using the RESET function will erase all stored settings.
normally.	Do not use this unless it is necessary.
The password for rating level has	• While “NO DISC” message appears on the display of main
been forgotten.	unit, hold the main unit's STOP (@) button for longer than 5
	seconds. “INITIAL” appears on the display and all settings will
	return to the default values.
	• Press the POWER button.
	Using the RESET function will erase all stored settings.
	Do not use this unless it is necessary.
Can't receive radio broadcast.	• Is the antenna connected properly?
	• If the antenna's input signal is weak, install an external FM
	antenna in an area with good reception.

52