Seagate ST31000520AS, ST31500541AS Power-management modes, Active mode, Idle mode, Sleep mode

Page 18

2.7.4Power-management modes

The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes:

Power modes

Heads

Spindle

Buffer

 

 

 

 

Active

Tracking

Rotating

Enabled

 

 

 

 

Idle

Tracking

Rotating

Enabled

 

 

 

 

Standby

Parked

Stopped

Enabled

 

 

 

 

Sleep

Parked

Stopped

Disabled

 

 

 

 

•Active mode

The drive is in Active mode during the read/write and seek operations.

• Idle mode

The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc access is necessary.

•Standby mode

The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary.

• Sleep mode

The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buf- fer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode with all current translation parameters intact.

• Idle and Standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary.

12

Barracuda LP Series SATA Product Manual, Rev. A

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Barracuda LP Series Sata ST32000542AS ST31500541AS ST31000520ASRevision history Revision DateContents Barracuda LP Series Sata Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 2000 and 1500 Gbyte models Drive specification ST32000542AS ST31500541AS ST31000520ASBarracuda LP Series Sata Product Manual, Rev. a Formatted capacity Default logical geometryLBA mode Recording and interface technologyTypical access times msec Read Write Physical characteristicsAccess time Start/stop timesPower specifications DC power requirements Typical current profiles Conducted noise Voltage toleranceIdle mode Power-management modesActive mode Sleep modeEnvironmental specifications Nonoperating shock ShockOperating shock VibrationElectromagnetic immunity Drive A-weighted Sound Power Levels SWL, BAAcoustics Test for Prominent Discrete Tones PDTsAgency certification Safety certificationReliability Electromagnetic compatibilityKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentConfiguring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions 2.0, 1.5 and 1.0 TB models Drive mountingBarracuda LP Series Sata Product Manual, Rev. a Serial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F3H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordWord Set Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services Presales SupportTechnical Support Warranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Page Barracuda LP Series Sata Product Manual, Rev. a Page Seagate Technology LLC

ST32000542AS, ST31000520AS, ST31500541AS specifications

Seagate has long been a prominent player in the hard disk drive (HDD) market, and their SATA drives have earned a reputation for reliability and performance. Among their notable models are the ST31500541AS, ST31000520AS, and ST32000542AS, each offering unique features and technologies that cater to various storage needs.

The ST31500541AS is a 1.5TB SATA drive known for its robust data handling capabilities. Operating at 7200 RPM, it offers a data transfer rate of up to 6Gb/s, making it suitable for demanding applications that require quick access to large files. This model features Seagate’s perpendicular recording technology, which increases storage density and efficiency. With an average seek time of 8.5 ms, users can expect swift performance for both read and write operations. Its 32MB cache also aids in enhancing data transfer rates and minimizing lag during data retrieval.

Next is the ST31000520AS, a 1TB drive that combines performance with energy efficiency. Also spinning at 7200 RPM, this model exploits Seagate's Advanced Power Management technology, which helps reduce power consumption and extend drive longevity. The ST31000520AS is particularly appealing for users looking to balance performance with energy costs. It features similar specifications to the ST31500541AS, including a 6Gb/s interface and a 32MB cache, ensuring that users can manage large workloads effectively.

Lastly, the ST32000542AS offers a compelling 2TB storage solution. This model caters to users with extensive storage needs, whether it be for multimedia content, backup solutions, or database management. Like its predecessors, it runs at 7200 RPM and benefits from Seagate's innovative technologies, including error correction and data recovery enhancements. With increased storage capacity and performance, this model is particularly suited for both personal and professional setups where data loss is not an option.

In summary, the Seagate ST31500541AS, ST31000520AS, and ST32000542AS exemplify the company's commitment to delivering high-performance hard drive solutions. With their emphasis on speed, energy efficiency, and advanced technologies such as perpendicular recording and power management, each model stands out in its capacity range, making them valuable assets for users seeking dependable storage options. Whether you're a gamer, a creative professional, or need a reliable backup solution, these drives are engineered to meet diverse computing needs with ease.
Top Page Image Contents