Seagate ST32000644NS Environmental limits, Temperature a. Operating, Humidity Relative humidity

Page 23

3.9Environmental limits

Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C). Maximum wet bulb temperature is 82°F (28°C).

3.9.1Temperature a. Operating

To obtain optimal performance, drives should be run at nominal case temperatures.

With cooling designed to maintain the case temperatures, the drive meets all specifications over a 41°F to 140°F (5°C to 60°C) drive ambient temperature range with a maximum temperature gradient of 36°F (20°C) per hour. The enclosure for the drive should be designed such that these temperatures not exceeded. Air flow may be needed to achieve these temperature values. Operation at case temperatures above these val- ues may adversely affect the drives ability to meet specifications.

The MTBF specification for the drive is based on operating in an environment that ensures that the case temperatures are not exceeded. Occasional excursions to drive ambient temperatures of 140°F (60°C) or 41°F (5°C) may occur without impact to specified MTBF. Air flow may be needed to achieve these tempera- tures. Continual or sustained operation at case temperatures above these values may degrade MTBF. The maximum allowable continuous or sustained HDA case temperature for the rated MTBF is 104°F (40°C).

To confirm that the required cooling for the electronics and HDA is provided, place the drive in its final mechanical configuration, perform random write/read operations. After the temperatures stabilize, measure the case temperature of the drive.

The maximum allowable HDA case temperature is 60°C. Operation of the drive at the maximum case tem- perature is intended for short time periods only. Continuous operation at the elevated temperatures will reduce product reliability.

b.Non-operating

–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive.

3.9.2Humidity

3.9.2.1Relative humidity

Operating:

5% to 90% noncondensing (30% per hour max)

 

 

Nonoperating:

5% to 95% noncondensing (30% per hour max)

 

 

3.9.2.2Wet bulb temperature

Operating:

37.7°C

(99.9°F max)

 

 

 

Nonoperating:

40.0°C

(104.0°F max)

 

 

 

3.9.3Altitude

Operating:

–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)

 

 

Nonoperating:

–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)

 

 

Constellation ES Serial ATA Product Manual, Rev. D

17

Image 23
Contents ST32000644NS ST31000524NS ST3500514NS Constellation ES Serial ATASheets affected or comments Revision historyRevision Date Contents Constellation ES Serial ATA Product Manual, Rev. D List of Figures Page Seagate Online Support and Services Seagate Technology support servicesIntroduction About the Serial ATA interface Drive specifications summary Drive specificationsSpecification summary tables 0A optional configuration through Smart Command Transport Recording and interface technology Default logical geometryLBA mode Formatted capacityTypical seek times ms Read Write Physical characteristicsSeek time Start/stop timesPower specifications 2000GB Drive DC power requirements 1000GB Drive DC power requirements Typical DC Maximum DC Maximum DCpeak 12.22 12.26 500GB Drive DC power requirementsTypical current profiles Voltage tolerance Conducted noiseSleep mode Power-management modesActive mode Idle modePower Condition Name Power Condition ID Description Extended Power Conditions PowerChoiceTMPowerChoice is invoked using one of two methods Power Condition Identifiers Power Condition Name PowerChoice Supported Extended Power Condition IndentifiersPower Condition Name Manufacturer Default Timer Values EPC Subcommand DescriptionHumidity Relative humidity Temperature a. OperatingWet bulb temperature Environmental limits2TB models ShockOperating shock Nonoperating shock 1TB and 500GB modelsFluid Dynamic Bearing FDB motor acoustics AcousticsTest for Prominent Discrete Tones PDTs Electromagnetic immunityElectromagnetic compatibility Safety certificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 Corrosive environment Environmental protectionHandling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewHot-Plug compatibility Serial ATA Sata interfacePin Function Definition Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions SignalCommand name Command code in hex Supported ATA commandsSupported ATA commands F5H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordWord Set Features command values Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsM.A.R.T. commands Constellation ES Serial ATA Product Manual, Rev. D Index ITE Page Constellation ES Serial ATA Product Manual, Rev. D Page Disc Drive, Scotts Valley, California 95066-4544, USA
Related manuals
Manual 50 pages 44.9 Kb