Samsung HT-AS720S-XAC Test tone, Using the Test Tone button, Press Test Tone button

Press SETUP/MENU button, and then press the ENTER button.

1

To Manually Output Test Tone

√

• “SETUP MODE” appears on the display and goes into Setup Mode.

2 Press ➛
❿ button to select the “TEST-T MANU”, and then press the ENTER button.

3 Press ➛
❿ button to select the speaker you want..

• Each time you press ➛
❿
button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W will be selected in turn.

4 Press …† button to set the test tone as you want.

• You can adjust the speaker output level from -10 to +10dB by 1 step.

• The sound gets quieter at -10dB and louder at +10dB.

To stop test tone

• Press SETUP/MENU button once time.

“SETUP OFF” appears on the display and test tone stops.

Test Tone Output

• F.L (front left) : -10 ~ +10dB

• CEN (center) : -10 ~ +10dB

• F.R (front right) : -10 ~ +10dB

• S.R (surround right) : -10 ~ +10dB

• SBR (surround back right) : -10 ~ +10dB

• SBL (surround back left) : -10 ~ +10dB

• S.L (surround left) : -10 ~ +10dB

• S.W (subwoofer) : -10 ~ +10dB

Test tone

Use the test tone check the speaker connection status or level.

To automatically output test tone

√

1 Press SETUP/MENU button, and then press the ENTER button.

•“SETUP MODE” appears on the display and the unit goes into Setup Mode.

2 Press button to select the “TEST-T AUTO”, and then press the ENTER button.

• Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W .

• During test signal output, press …† button to adjust the individual speaker output level from -10 to +10 dB by 1 step.

To stop test tone

•Press SETUP/MENU button once time.

“SETUP OFF” appears on the display and test tone stops.

Using the Test Tone button

Press TEST TONE button.

•Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W.

•During test tone output, press …† button to adjust the speaker output level from

-10 to +10 dB by 1 step.

ENG

OPERATION

26 27