Seagate Understanding Factory Jumper Settings and Master Slave Configuration for Drives

Page 25

ST310014ACE Product Manual, Rev. D

2.3 Jumper settings

2.3.1 Master/slave configuration

The options jumper block shown in Figure 2 is used to configure the drive for operation. It is the 8-pin dual header between the interface connector and the power connector. Use the following settings to configure the drive as a master or a slave.

Master or single drive. The drive is configured at the factory for a master or single-drive operation with a jumper set on pins 7 and 8.

Drive as slave. Remove all jumpers.

Drive as master with a non-ATA-compatible slave.

Set a jumper on pins 5 and 6 and a jumper on pins 7 and 8. Use this jumper setting only if the drive does not work as a master with no jumpers installed.

Options jumper block

Master or single drive

Drive is slave

Master with non ATA- compatible slave

Cable select

7 5 3 1

8 6 4 2

Circuit Board

Figure 3. Master/slave jumper settings

Image 25

Contents ST310014ACE Ultra ATA Interface Drive Page ST310014ACE Ultra ATA Interface Drive Page Contents ATA interface Configuring and mounting the driveFigures ST310014ACE Product Manual, Rev. D Introduction Specification summary table Standby to ready sec typical LBA Mode Default logical geometryFormatted capacity Physical organizationStart/stop times Physical characteristicsSeek times Power consumption Power specificationsCurrent amps Time seconds Power Mode Typical Watts Typical Amps Means 12VConducted noise Power-management modesVoltage tolerance Temperature gradient Environmental tolerances Ambient temperatureSleep mode Idle and Standby timersHumidity 3.1 Relative Humidity 3.2 Wet bulb temperatureAltitude ShockOperating vibration ST310014ACE Acoustic mode Idle SeekNonoperating vibration Drive acousticsElectromagnetic immunity Agency certification Safety certificationReliability Taiwan Bsmi Electromagnetic compatibilityKorean RRL Australian C-Tick N176 FCC verificationHandling and static-discharge precautions Configuring and mounting the driveBreather filter hole location Breather filter hole precautionsDrive as master with a non-ATA-compatible slave Jumper settings Master/slave configurationUltra ATA/100 cable Cable-select optionDrive mounting Mounting dimensions-top, side and end viewATA interface ATA interface signals and connector pinsO pins and supported ATA signals Command name Command code in hex ATA-standard commands Supported ATA commandsCommand name Command code in hex Identify Drive commandATA-standard power-management commands ATA-standard security commands0C5AH Word DescriptionXxxxH Xx3FH Word Description ValueBit Word Description if bit is set to Bit WordSet Features command 0AH Code in Features A.R.T. Command Register 4 S.M.A.R.T. commandsPage Seagate Technology LLC

ST310014ACE specifications

The Seagate ST310014ACE is a robust hard disk drive that has gained recognition for its reliability and performance in various computing environments. As a member of the Barracuda series, it is designed for both personal and professional use, catering to a wide range of applications, from desktop computers to external storage solutions.

One of the standout features of the ST310014ACE is its 1TB storage capacity, which allows users to store vast amounts of data, including multimedia files, applications, and system backups. With this generous capacity, it is an excellent choice for individuals who require extensive storage for digital photos, videos, music libraries, and documents.

In terms of performance, the ST310014ACE operates at a spindle speed of 7200 RPM. This rotational speed provides quick access times and improved data transfer rates, making it ideal for tasks that require fast data retrieval, such as gaming, video editing, and large file transfers. Coupled with an 8MB cache, the drive enhances the efficiency of data processing, ensuring smoother operation.

The ST310014ACE also employs the Serial ATA interface, specifically SATA II, which allows for improved connectivity and faster data transfer speeds compared to older PATA drives. With a maximum data transfer rate of 3 Gb/s, users can experience seamless interaction with their data and enjoy higher overall system performance.

Reliability is a critical factor for any storage device, and the Seagate ST310014ACE delivers on this front. It features comprehensive error correction codes and advanced algorithms that minimize the chance of data corruption. Additionally, the drive provides a mean time between failures (MTBF) rating of 1 million hours, which underscores its durability and longevity.

Another notable characteristic of the ST310014ACE is its power efficiency. The drive is designed to consume less energy during operation and idle states, contributing to lower electricity costs and less heat generation. This is particularly beneficial for users who are environmentally conscious or those who operate systems requiring minimal power draw.

In summary, the Seagate ST310014ACE stands out as a versatile hard drive that marries substantial storage capacity with impressive performance and reliability. Its array of features, including a 7200 RPM spindle speed, 8MB cache, and SATA II interface, make it suitable for a variety of computing tasks. Coupled with its durability and power efficiency, this hard drive remains a solid choice for users seeking dependable storage solutions.