Seagate ST3250311SV, ST31000525SV, ST3500410SV manual Power specifications

Page 16

2.8Power specifications

The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 1 on page 20.

2.8.1Power consumption

Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature.

• Spinup power

Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.

• Idle mode power

Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location.

• Operating

Operating power is measured by simulating a typical PVR operating environment, using a 50% write 50% read algorithm.

• Standby mode

During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down mode.

2.8.2DC power requirements

•Power supply tolerance +5V DC +/-5%

•Power supply tolerance +10V DC +/-10%

•Startup current (A, max.) 2.0

•Idle (W) 7 (1TB/500GB); 5 (250GB)

•Operating Power (W) 10.4 (1TB/500GB); 8 (250GB)

•Standby power (W) 1.0

2.8.3Conducted noise

Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line.

•Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz.

•Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz.

Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current.

10

SV35.5 Series SATA Product Manual, Rev. A

Page 15 Page 17
Image 16
Page 15 Page 17
Contents SV35.5 Series Sata ST31000525SV ST3500410SV ST3250311SVRevision history Revision DateContents SV35.5 Series Sata Product Manual, Rev. a Attaching Sata cabling . Mounting dimensions List of FiguresPage Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specifications summary for 1 Tbyte models Drive specification ST31000525SVWill display the warranty information for your drive Drive specifications summary for 500 and 250 Gbyte models Drive specification ST3500410SV ST3250311SVSV35.5 Series Sata Product Manual, Rev. a Default logical geometry LBA modeFormatted capacity Recording and interface technologySeek time Physical characteristicsStart/stop times Power specifications Power-management modes Active modeIdle mode Sleep modeEnvironmental specifications Shock Operating shockNonoperating shock Disk models VibrationDrive A-weighted Sound Power Levels SWL, BA Acoustics emissionsElectromagnetic immunity Test for Prominent Discrete Tones PDTsSafety certification ReliabilityAgency certification Electromagnetic compatibilityAustralian C-Tick N176 Korean RRLFCC verification Environmental protection Corrosive environmentSV35.5 Series Sata Product Manual, Rev. a Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions Drive mountingSV35.5 Series Sata Product Manual, Rev. a Serial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F3H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordWord Set Features command Set Features command valuesA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Presales Support Seagate Technology support servicesTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index RRL Page SV35.5 Series Sata Product Manual, Rev. a Page Seagate Technology LLC
Related manuals
Manual 46 pages 56.47 Kb Manual 46 pages 37.97 Kb

ST3500410SV, ST3250311SV, ST31000525SV specifications

Seagate, a stalwart name in the data storage industry, offers a range of hard disk drives that cater to various needs and applications. Three notable models are the ST3250311SV, ST3500410SV, and ST31000525SV, each designed with unique characteristics and features suitable for diverse environments, from personal computing to enterprise storage solutions.

The ST3250311SV is a 250GB SATA drive that operates at 7200 RPM, providing a solid balance of performance and capacity. One of its main features is its 8MB cache, which enhances read and write speeds, making it suitable for high-demand applications like gaming and multimedia. The drive is also designed with Seagate's advanced data protection technologies, including an intelligent error recovery system that serves to minimize data loss and increase reliability during operation.

Next in line, the ST3500410SV offers a larger capacity of 500GB, making it an excellent choice for users who require more storage. Like its counterpart, it operates at 7200 RPM but is equipped with a 16MB cache for even better performance. The drive is built on Seagate's perpendicular recording technology, which increases storage density and improves data integrity. The ST3500410SV is particularly well-suited for server environments, where reliability and speed are critical. Its advanced power management features help reduce energy consumption, making it a more eco-friendly option for data centers.

Finally, the ST31000525SV provides an impressive 1TB of storage capacity, leveraging the same 7200 RPM speed and 32MB cache as its predecessors. This model exemplifies Seagate's focus on enhancing user experiences with greater storage and quicker access times, fulfilling the demands of both consumer and enterprise markets. With features like S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology), this drive helps users keep tabs on their drive's health and performance, anticipating potential failures and ensuring data security.

In summary, the Seagate ST3250311SV, ST3500410SV, and ST31000525SV drives showcase a range of capacities and features aimed at meeting the needs of today’s data-driven world. From gaming and personal use to demanding enterprise applications, these hard drives combine speed, reliability, and advanced technologies to deliver outstanding performance and data protection. Their robust design and efficient power management reinforce Seagate's commitment to innovation and sustainability in data storage solutions.
Top Page Image Contents