Seagate 2250, 1680 manual Start times, Power specifications, Power consumption, Typical Max

Page 16

8Marathon 2250 and Marathon 1680 Product Manual

1.6 Start times

Power-on to Ready (sec)

3.5 typical, 7 max

Standby to Ready (sec)

2 typical, 3 max

Idle to Ready (sec)

0.4 max

1.7 Power specifications

The drive receives DC power (+5V) through pin 41 and pin 42 of the AT interface connector.

1.7.1Power consumption

Power requirements for the drive are listed in the table below. Typical power measurements are based on an average of drives tested under nominal conditions, using 5.0V input voltage at 40°C ambient temperature at sea level. Active mode current and power are measured with a 32-msec delay between each operation and the drive in default logical geometry. Seeking power and currents are measured during one-third-stroke buffered seeks. Read/write power and current are measured with the heads on track, based on a 16-sector write followed by a 32-msec delay, then a 16-sector read followed by a 32-msec delay. Spinup power is measured from time of power-on to time of drive-ready for normal operation. The average peak represents peak power that is drawn from the battery.

 

Watts

 

Amps

 

Mode

(at nominal voltage)

(at nominal voltage)

 

Typical

Max

Typical

Max

Spinup

 

 

 

 

Peak (see Figure 1) —

—

 

1.3

Average

4.0

—

0.8

—

Active

 

 

 

 

Read/Write

2.5

2.6

0.5

0.52

Seeking

2.5

2.6

0.5

0.52

Idle

1.2

1.3

0.24

0.26

Standby

0.3

0.36

0.06

0.072

Sleep

0.1

0.1

0.02

0.02

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Marathon ATA Interface Drives Page Product Manual Page Contents ATA Attachment-3 Interface ATA-3 Drive mounting and configurationAppendix. Compatibility Notes Figures Marathon 2250 and Marathon 1680 Product Manual Introduction Specification summary table Drive Specification Marathon 2250 1680Read/Write power and current typical Marathon 2250 and Marathon 1680 Product Manual Drive specifications Default logical geometryFormatted capacity Supported CHS translation geometriesPhysical organization Recording and interface technologyPhysical characteristics Seek timeSeek type Typical read MsecPower specifications Power consumptionWatts Amps Mode At nominal voltage Start timesTypical current profile Power recoveryConducted noise Mode Heads Spindle Buffer Power-management modesVoltage tolerance Page Environmental tolerances Ambient temperature Temperature gradientWet bulb temperature Humidity Relative humidityOperating shock Nonoperating shockVibration Operating vibrationMode Typical Nonoperating vibrationDrive acoustics ReliabilityElectromagnetic Compatibility Agency certification Safety certificationFCC verification Marathon 2250 and Marathon 1680 Product Manual Handling and static-discharge precautions Drive mounting and configurationJumper settings Master/slave configuration Jumper For pins Configuration PinRemote LED configuration Drive mountingA40 A39 To tips of I/O connector pins Mounting dimension specifications Dim Description InchesMounting dimension specifications ATA interface connector Dimensions are in inches mmMarathon 2250 and Marathon 1680 Product Manual AT bus signal levels ATA interface signals and connector pinsATA Attachment-3 Interface ATA-3 O pins and supported ATA signals ATA Interface commands Supported ATA commands C4HDrive Security Commands Command Supported by Marathon Command name CodeATA-standard power-management commands Identify Drive command Word Description ContentsXxxx H Word Bit Description if bit is set to Set Features command Page 4 S.M.A.R.T. commands Drive-Security commands Marathon 2250 and Marathon 1680 Product Manual ECC testing Appendix. Compatibility notesPage

2250, 1680 specifications

Seagate, a leader in data storage solutions, has consistently pushed the boundaries of technology to meet the demands of a rapidly evolving digital landscape. Among its innovative offerings, the Seagate 1680 and 2250 drives stand out, showcasing advanced features and high performance tailored for both personal and professional use.

The Seagate 1680 is a robust storage solution designed primarily for high-capacity needs. With a storage capacity reaching up to 16TB, it serves as an excellent choice for users requiring significant space for large files, backups, and multimedia content. This drive is particularly appealing for creatives and professionals in industries like video production and graphic design, where data management is pivotal.

On the other hand, the Seagate 2250 takes performance a step further, boasting up to 22TB of storage. This drive leverages Seagate's latest technology, including the innovative HAMR (Heat-Assisted Magnetic Recording) for enhanced storage densities. HAMR allows for more data to be stored in a single platter, resulting in increased capacity without compromising speed or reliability.

Both models support USB 3.2 interface, ensuring fast data transfer rates. With read speeds that can reach up to 250MB/s, users can effortlessly transfer large files, enhancing productivity and workflow efficiency. The drives also feature built-in security options that protect sensitive data through hardware encryption, making them suitable for businesses and individuals keen on maintaining data integrity and confidentiality.

In terms of durability, both the Seagate 1680 and 2250 are built to withstand high usage environments. They come equipped with features such as shock resistance and data recovery options, thus minimizing the risk of data loss due to accidental drops or technical failures.

Additionally, these drives are optimized for multi-device compatibility, offering seamless integration with various operating systems and applications. Users can easily connect the drives to PCs, laptops, and gaming consoles, ensuring that their data is accessible whenever needed.

In summary, the Seagate 1680 and 2250 represent the cutting edge of data storage technology, combining massive storage capacities with high-speed performance and robust security features. Whether for personal or professional use, these drives meet diverse storage needs, making them a valuable addition to any tech setup.
Top Page Image Contents