Seagate ST32430DC, ST31230WC manual Removable terminator circuits are enabled, Installed, Off

Page 30

28Hawk 2LP (Wide) Installation Guide, Rev. A

[4]The drive time-shares the ID and BUSY LED func- tions of J6 and J1-auxiliary. That is, a cable may be attached to one of these headers to pick up the signal that lights the external BUSY LED indicator. If lines for external ID selection are not also in- cluded in the cable, jumper plugs must be used on the header not having a cable connected in order to establish drive ID. The drive reads the ID from J6 and J1-auxiliary for 250 ms after power-on or drive reset, and then uses these headers for the LED function the remainder of the time.

[5]"W" models only.

[6]"W/WD" models only.

[7]"WC/DC" models only. Use the ID signals from the host in J1, or jumpers on J6 to establish drive ID, but not both.

[8]Not used on "WC/DC" models. Do not install jump-

ers.

J2

 

Jumper

 

Position

Jumper Function Description

TE

(Applies to "W" models only)

On

With the jumper installed, the On-board (non-

 

removable) terminator circuits are enabled

 

(connected to the I/O lines).Default is jumper

 

installed.

Off

Terminator circuits not connected to I/O lines.

Image 30
Contents Installation Guide Contents Introduction Electromagnetic interference EMI con- siderationsPage Before you begin Page Page Safety instructions Sicherheitsanleitung VorsichtInstallation Overview Page Product repair information Shipping Product repair and return informationTechnical support services SeaBOARD service SeaFone telephone number 408/438-8222SeaTDD telephone number 408/438-5382 Modem Location NumberHawk 2LP family Wide information ModelInitial setup information Scsi interface cable connectionDC Power connection DC power connection, 68 pin Scsi I/O connectorScsi address selection Terminator resistor packs Optional parity bit enable Read/Write head auto-parkWrite precompensation and reduced write current Scsi I/O Drive configuration WD family 68 pin Scsi I/O drivesHawk 2LP family WC and DC model 80 pin Scsi I/O drives Drive configurator Hawk 2LP family W/WD model Drive configurator Hawk 2LP family W/WD models Drive configurator for Hawk 2LP family WC/DC models Page Removable terminator circuits are enabled InstalledOff Default setting DS METP TP TP Position aTors for single-ended I/O only Models W and WD only Model WC/DC onlyDrive installation Disc drive mountingHawk 2LP Wide Installation Guide, Rev. a Hawk 2LP Wide Installation Guide, Rev. a Grounding Scsi interface drives

ST31230DC, ST31230W, ST32430W, ST31230WD, ST32430DC specifications

Seagate, a pioneering force in the hard drive industry, introduced a series of SCSI disk drives in the early 1990s, notably the ST32430WC, ST32430WD, ST31230WC, ST32430DC, and ST31230WD. These drives showcased innovative features and cutting-edge technology for the era, establishing a benchmark for performance and reliability.

The ST32430WC and ST32430WD are notable for their high-performance capabilities. With a storage capacity of 2.1 GB, these drives were designed primarily for workstations and servers. They utilized a fast 10,000 RPM spindle speed, enabling quick data access and improved data throughput. The "WC" and "WD" designations indicate SCSI interface types, with the "WC" models featuring Wide SCSI support, offering increased data transmission rates. Additionally, the drives implemented Seagate's advanced error correction and data integrity technologies, which ensured reliability for enterprise applications.

On the other hand, the ST31230WC and ST31230WD offered similar specifications but came with slightly different capacities, reaching up to 1.0 GB. Like their higher-capacity counterparts, these drives provided wide interface capabilities and boasted robust error correction features. Their reliability and performance made them ideal for small servers and high-performance workstations where quick access to data was a crucial requirement.

The ST32430DC, or the "DC" model, was designed with a focus on different enterprise applications. This variant exhibited a dual-port SCSI interface, allowing for connectivity to multiple systems. This feature made it highly suitable for multiprocessing environments, where uptime and data access rates are paramount. The drive's design was geared towards high-availability systems that required redundancy and consistent performance.

All these models leveraged Seagate's commitment to building high-reliability drives with extended lifespans. They were equipped with advanced thermal management features, ensuring stable operation even under heavy workloads. This technological foundation, combined with superior craftsmanship, positioned Seagate as a leader in the SCSI market during this pivotal time in computing history.

As the technology landscape has evolved, the ST32430 and ST31230 series may now be considered retro, but their legacy remains significant. They paved the way for modern storage solutions, and their development reflects a crucial period in the evolution of data storage technology. The foundational principles established in these drives continue to influence the design and functionality of today's advanced storage systems.