Seagate ST3250410AS, ST3250310AS manual Drive mounting, Mounting dimensions

Page 25

3.4Drive mounting

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figures 3 for drive mounting dimensions. Follow these important mounting pre- cautions when mounting the drive:

•Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.

•Use only 6-32 UNC mounting screws.

•The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes.

•Do not overtighten the mounting screws (maximum torque: 6 inch-lb).

Figure 3. Mounting dimensions

Barracuda 7200.10 Serial ATA Product Manual, Rev. B

Image 25

Contents ST3250410ASST3250310AS Barracuda 7200.10 Serial ATARevision Date Revision historyContents Barracuda 7200.10 Serial ATA Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specification ST3250410AS ST3250310AS Drive specifications summary for 250 Gbyte modelsWill display the warranty information for your drive LBA mode Default logical geometryFormatted capacity Recording and interface technologySeek time Physical characteristicsStart/stop times Typical seek times msec Read WritePower specifications Active mode Power-management modesIdle mode Sleep modeEnvironmental specifications Acoustic emission Radio frequency environments Electromagnetic immunityTest Description Performance level Reference standard Reliability Safety certificationAgency certification Electromagnetic compatibilityAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Barracuda 7200.10 Serial ATA Product Manual, Rev. B Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensionsBarracuda 7200.10 Serial ATA Product Manual, Rev. B Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Word Description Value Identify Device commandXx07H 129 Seagate-reserved Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Internet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Page Barracuda 7200.10 Serial ATA Product Manual, Rev. B Page Seagate Technology LLC

Related manuals

Manual 68 pages 14.65 Kb

ST3250310AS, ST3250410AS specifications

The Seagate ST3250310AS and ST3250410AS are notable hard drives that belong to the Barracuda series, known for their value and performance in the consumer and business sectors. These drives, featuring SATA interface technology, are especially popular among users seeking reliable storage solutions for desktops and personal computers.

The ST3250310AS model comes with a storage capacity of 250 GB, while the ST3250410AS offers an increased capacity of 400 GB. Both models are designed with a standard 3.5-inch form factor, making them compatible with most PC enclosures. The drives are equipped with a 7200 RPM rotational speed, which provides enhanced data access times and improved overall performance compared to slower drives.

One of the key features of these devices is their utilization of the SATA 3.0 interface, allowing for data transfer rates of up to 3 Gbps. This interface enhances the drive's performance when paired with compatible motherboards and systems. Additionally, the drives are equipped with a 16 MB buffer, which assists in improving the efficiency of the read and write operations, particularly during tasks that require frequent data access.

Seagate's Advanced Format technology is another characteristic of the ST3250310AS and ST3250410AS. This technology uses larger sector sizes, which allows for more efficient storage of data, resulting in increased capacity and potentially improved reliability. Furthermore, the drives come with a mean time between failures (MTBF) rating of about 1,000,000 hours, signifying their robust build quality designed for durability in varied computing environments.

The hard drives also leverage Seagate's SmartAlign technology, facilitating the drive's operation with Advanced Format hard drives seamlessly. The drives are compatible with various operating systems and are particularly suited for applications requiring high data availability and fast retrieval, such as gaming and media storage.

In summary, the Seagate ST3250310AS and ST3250410AS hard drives are solid options for users looking for dependable, high-performance storage solutions. Their blend of reliability, speed, and efficiency makes them suitable for a variety of applications, from personal computing to small business use. With their combination of advanced technologies and user-friendly characteristics, these drives stand out as capable choices for enhancing computer storage capabilities.