Seagate ST740211DE-40GB, ST760211DE-60GB, ST730212DE-30GB manual Power specifications

Page 12

2.7Power specifications

The drive receives DC power (+3.3V) through the ZIF connector (IDE interface).

2.7.1Power consumption

Power requirements for the drives are listed in the table on page 7. Typical power measurements are based on an average of drives tested, under nominal conditions, using +3.3V input voltage at 25°C ambient temperature.

•Startup mode

Startup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.

•Seek mode

During seek mode, the read/write actuator arm moves toward a specific position on the disc surface and does not execute a read or write operation. Servo electronics are active. Seek power is measured based on three random seek operations every 100 msecs.

•Read/write mode

Read/write power is measured with the heads on track, while the head is reading/writing from/to disc. It is performed with 100 percent duty cycle of read/write operation.

•Performance Idle mode

During Performance Idle mode, the heads are on track but no reading or writing is done. The spindle motor is spinning at full speed.

•Low power idle mode

During Low power Idle mode, the heads are unloaded but the spindle motor is spinning at full speed. Servo and read/write electronics are in powered down mode.

•Standby / Sleep mode

During Standby/Sleep mode, the spindle motor is not spinning, and the servo and read/write electronics are in powered down mode.

6

Lyrion Series IDE Product Manual, Rev. F

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Lyrion Series IDE ST760211DE ST740211DE ST730212DERevision history Revision Date Sheets affected or commentsContents Lyrion Series IDE Product Manual, Rev. F List of Figures Lyrion Series IDE Product Manual, Rev. F Introduction DisclaimerDrive care Lyrion Series IDE Product Manual, Rev. F Drive specifications SpecificationsDrive specification ST760211DE ST740211DE ST730212DE OverviewDefault logical geometry LBA mode addressingFormatted capacity Model Cylinders Heads SectorsPhysical characteristics Technology SpecificationRecording and interface technology Time to readyPower specifications DC power Power Consumption at Average WTypical current profile Power-management modes Active modeStandby/Sleep mode Conducted noiseEnvironmental specifications Shock Operating shockNonoperating shock VibrationOperating sweep sine vibration Operating random vibrationOperating random vibration profile Nonoperating sweep sine vibrationAcoustics Nonoperating random vibrationNonoperating random vibration profile Corrosive environmentMeasurement type Specification Electromagnetic immunityReliability Electromagnetic immunitySafety certification Agency certificationElectromagnetic compatibility Korean RRLChina Restriction of Hazardous Substances RoHS Directive 12.4 中国限制危险物品的指令FCC verification Configuring and mounting the drive Handling and static discharge precautionsPage Drive installation Lyrion Series mechanical dimensions-top, side and end viewLyrion Series FPC dimensions Mounting considerationsConnector interface signals and connector pins Way ZIF IDE interface connector signalsInterface description Iordy Supported ATA commands Supported commandsCommand Name Command Op-Code Command Type Supported commands Identify Device command Word ATA specification ValueLyrion Series IDE Product Manual, Rev. F Set Features command Features register valuesFeature Description Lyrion Series IDE Product Manual, Rev. F Seagate Technology support services InternetPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersIndex Page Page Seagate Technology LLC

ST740211DE-40GB, ST760211DE-60GB, ST730212DE-30GB specifications

Seagate, a renowned name in the storage solutions industry, has made significant contributions with its range of hard disk drives (HDDs) designed for various applications. Among these are the Seagate ST730212DE-30GB, ST760211DE-60GB, and ST740211DE-40GB models. Each of these drives brings unique features and technologies tailored to meet the demands of users seeking reliable data storage.

Starting with the Seagate ST730212DE-30GB, this drive offers a compact storage solution with a capacity of 30GB, making it suitable for handheld devices or applications where space is a premium. The ST730212DE utilizes a 2.5-inch form factor, which allows for easy integration into various devices while ensuring portability. This HDD is built with an average latency of 12 ms and a spindle speed of 4,200 RPM, which provides a decent performance for applications that require quick access to stored data. Its ATA interface ensures compatibility with a wide range of systems, providing flexibility for users.

Next in line is the Seagate ST760211DE-60GB, which doubles the storage capacity of the previous model to 60GB. The ST760211DE is designed for slightly more demanding applications, making it ideal for users who require additional storage without compromising on size. Similar to the ST730212DE, this drive features a 2.5-inch form factor and operates at a spindle speed of 4,200 RPM. Its enhanced capacity allows for more extensive media libraries, applications, and files, while the ATA interface maintains broad compatibility.

Finally, the Seagate ST740211DE-40GB strikes a balance between the two preceding models, offering 40GB of storage. This drive caters to those who need more than what the ST730212DE offers but do not require the full 60GB of the ST760211DE. With the same dimensions and spindle speed, the ST740211DE is versatile and can fit various applications, from laptops to gaming consoles, all while ensuring optimal performance.

All three models embody Seagate's commitment to reliability and performance. They incorporate advanced technologies for data integrity and longevity, along with robust error correction features that minimize the risk of data loss. With their varying capacities and consistent form factors, users can choose the drive that best suits their needs, making these models a great choice for both casual and professional use. Overall, the Seagate ST730212DE-30GB, ST760211DE-60GB, and ST740211DE-40GB represent excellent options for those seeking dependable storage solutions.
Top Page Image Contents