Seagate ST39173FC manual European Union Compliance, Australian C-Tick

Page 9

Barracuda 9LP FC Installation Guide, Rev. A

7

European Union Compliance

If this model has the CE Marking, it complies with the European Union requirements of the Electromagnetic Compatibility Direc- tive 89/336/EEC of 03 May 1989 as amended by Directive 92/31/ EEC of 28 April 1992 and Directive 93/68/EEC of 22 July 1993.

Australian C-Tick

If this model has the C-Tick Marking, it complies with the Austra- lia/New Zealand Standard AS/NZS3548 1995 and meets the Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Management Agency (SMA).

Seagate uses an independent laboratory to confirm compliance to the above directives. The drive was tested in a representative system for typical applications. The selected system represents the most popular characteristics for test platforms. The system configurations include:

486, Pentium, and PowerPC Microprocessors

3.5-inch Floppy Disc Drive

Keyboard

Monitor/Display

Mouse

Printer

Although the test system with this Seagate model complies to the directives, we cannot guarantee that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide CE Marking for their product.

Image 9
Contents Barracuda 9LP FC Fibre Channel Disc Drive ST39173FC Contents Electrostatic discharge protection PrefaceImportant safety information and precautions Page Wichtige Sicherheitshinweise Page Barracuda 9LP FC Installation Guide, Rev. a Australian C-Tick European Union ComplianceDisc Drives 1-877-271-3285 or Seagate Technology support servicesTape Products 1-800-626-6637 or SeaFONE 1-800-SEAGATESeaNET SeaBOARD Online servicesFAX services SeaFAXTechnical support FAX Technical support Direct-support servicesSeaTDD Customer service centersManufacturer’s representatives Barracuda 9LP FC disc drive General descriptionCharacteristics Providing adequate cooling Installing the Barracuda 9LP FC driveKühlung des Systems Suggested air flow Abbildung 2. Empfohlener Luftstromverlauf Mounting the drive Installation des LaufwerkesBarracuda 9LP FC Installation Guide, Rev. a Dimensions Abbildung 3 Laufwerkabmessungen Formatting the drive Inserting the driveEnabling write cache Connecting remote LEDsLED indicator connector J6 FC-SCA pin descriptions SEL2 General installation troubleshooting TroubleshootingPage