48 | Chapter 4 |
SSH
Use the SSH Configuration dialog box (click SSH) to set SSH connection configurations. After configuring, be sure to click OK.
TIP: X forwarding/tunneling is automatic and allows you to execute remote X applications.
Network
Use the Network tab to configure the network settings:
•Description - Enter a name/label for the connection.
•Host - Enter a host name or IP address.
•Remote Username - Enter a username.
•Remote Command - Enter the command to execute on the server.
Connection
Use the Connection tab to configure the connection settings:
•Auto Connect - Starts the connection automatically after system startup.
•Ping Before Connect - Pings the connection to see if it is reachable before the connection is attempted.
•Auto Reconnect - Reconnects automatically after a disconnection occurs.
•Delay before retrying - Select the amount of time to delay the reconnection attempt after a disconnection occurs.