Seagate ST3500841NS, ST3500641NS manual Set Features command values

Page 32

4.3.2Set Features command

This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter- rupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled. The acceptable values for the Features register are defined as follows:

Table 6: Set Features command values

02H

Enable write cache (default).

03H

Set transfer mode (based on value in Sector Count register).

 

Sector Count register values:

 

00H

Set PIO mode to default (PIO mode 2).

 

01H

Set PIO mode to default and disable IORDY (PIO mode 2).

 

08H

PIO mode 0

 

09H

PIO mode 1

 

0AH

PIO mode 2

 

0BH

PIO mode 3

 

0CH

PIO mode 4 (default)

 

20H

Multiword DMA mode 0

 

21H

Multiword DMA mode 1

 

22H

Multiword DMA mode 2

 

40H

Ultra DMA mode 0

 

41H

Ultra DMA mode 1

 

42H

Ultra DMA mode 2

 

43H

Ultra DMA mode 3

 

44H

Ultra DMA mode 4

 

45H

Ultra DMA mode 5

 

46H

Ultra DMA mode 6

10H

Enable use of SATA features

55H

Disable read look-ahead (read cache) feature.

82H

Disable write cache

90H

Disable use of SATA features

AAH

Enable read look-ahead (read cache) feature (default).

F1H

Report full capacity available

Note. At power-on, or after a hardware or software reset, the default values of the features are as indi- cated above.

26

NL35 Series 7200.2 SATA Product Manual, Rev. C

Page 31 Page 33
Image 32
Page 31 Page 33
Contents NL35 Series 7200.2 Serial ATA ST3500841NS ST3500641NSPage Contents NL35 Series 7200.2 Sata Product Manual, Rev. C List of Figures Page Introduction NL35 Series 7200.2 Serial ATAAbout the Serial ATA interface Drive specifications Default logical geometryLBA mode Formatted capacityPhysical characteristics Recording and interface technologySeek time Typical seek times msec Read WritePower specifications Start/stop timesVoltage tolerance Typical current profileConducted noise Power-management modes Active modeIdle mode Sleep modeEnvironmental specifications Acoustics VibrationOperating vibration Nonoperating vibrationElectromagnetic immunity ReliabilityRadio frequency environments Test Description Performance level Reference standardAgency certification Environmental protection Corrosive environment NL35 Series 7200.2 Sata Product Manual, Rev. C Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingNL35 Series 7200.2 Sata Product Manual, Rev. C Serial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionCommand name Command code in hex Supported ATA commandsSupported ATA commands F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commands3.1 S.M.A.R.T. Command Transport SCT Code in features register A.R.T. commandNL35 Series 7200.2 Sata Product Manual, Rev. C Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index RRL Sata NL35 Series 7200.2 Sata Product Manual, Rev. C Page Seagate Technology LLC
Related manuals
Manual 2 pages 620 b

ST3500641NS, ST3500841NS specifications

The Seagate ST3500841NS and ST3500641NS are robust hard drives specifically designed for enterprise environments, catering to the demanding needs of data centers, server farms, and storage solutions. These drives are part of Seagate's enterprise series and reflect a commitment to reliability, performance, and capacity.

One of the main features of the ST3500841NS and ST3500641NS is their impressive storage capacity. The ST3500841NS offers 500GB of storage, while the ST3500641NS provides a slightly lower capacity at 640GB. Both drives utilize a standard 3.5-inch form factor, making them suitable for a variety of server and storage configurations. They operate at a high spindle speed of 7200 RPM, which contributes to faster data access and overall improved performance compared to traditional 5400 RPM drives.

These drives are designed to sustain high workloads and feature a mean time between failures (MTBF) rating that ensures reliability over extended periods of operation. With their enhanced error correction capabilities, data integrity is maintained even under heavy loads, making these drives ideal for use in critical applications where data loss is not an option.

The integration of technologies such as Native Command Queuing (NCQ) enhances the performance of these drives in multi-user environments. NCQ allows the drive to optimize the order of read and write commands, reducing latency and improving overall throughput. Furthermore, the ST3500841NS and ST3500641NS both feature an SATA interface, supporting speeds of up to 3.0 Gb/s, which is the standard for modern storage solutions.

Another noteworthy characteristic of these drives is their energy efficiency. Despite their robust performance, the ST3500841NS and ST3500641NS are designed to consume less power, thereby reducing operational costs and contributing to a more sustainable data center environment.

In summary, the Seagate ST3500841NS and ST3500641NS are purpose-built for enterprise applications, offering a blend of capacity, performance, and reliability. Their advanced technologies, coupled with impressive MTBF ratings and energy efficiency, make them suitable for critical applications in various high-demand environments. Whether utilized in small server systems or large-scale data centers, these drives provide the robust performance that businesses require in today’s data-driven landscape.
Top Page Image Contents