Installation Instructions

Warnings and Cautions:

Secure Racking

If Secure Racked units are installed in a closed or multi-unit rack assembly, they may require further evaluation by Certification Agencies. The following items must be considered.

1.The ambient within the rack may be greater than room ambient. Installation should be such that the amount of air flow required for safe operation is not compromised. The maximum temperature for the equipment in this environment is 55°C. Consideration should be given to the maximum rated ambient.

2.Installation should be such that a hazardous stability condition is not achieved due to uneven loading.

Input Supply

Check nameplate ratings to assure there is no overloading of supply circuits that could have an effect on overcurrent protection and supply wiring.

Grounding

Reliable earthing of this equipment must be maintained. Particular attention should be given to supply connections when connecting to power strips, rather than direct connections to the branch circuit.

No Serviceable Parts Inside; Authorized Service Personnel Only

Do not attempt to repair or service this device yourself. Internal components must be serviced by authorized personnel only.

• Shock Hazard - Do Not Enter

Disconnect Power

If any of the following events are noted, immediately disconnect the unit from the outlet and contact qualified service personnel:

1.If the power cord becomes frayed or damaged.

2.If liquid has been spilled into the device or if the device has been exposed to rain or water.

Two Power Supply Cables

Note that PTS Series units feature two separate power circuits, and a separate power supply cable for each power circuit. Make certain to disconnect both power supply cables before attempting to service or remove the unit.

15-Amp "Starter" Cable

Depending on your specific model, PTS Series units may be shipped with either one or two 125 VAC, 15 Amp "Starter" Cables. These Starter Cables will allow you to connect the PTS to power for bench testing and initial start up and are adequate for applications that only require 15 Amps. For 20-Amp power switching applications, please refer to the WTI Power Cable guide supplied with the unit, or use appropriate 20-Amp cables.

Units with Attached Power Supply Cable(s)

For units with fixed Power Cords the socket-outlet shall be installed near the equipment and shall be easily accessible.

PTS-9CM20-2, PTS-8NE15-1 specifications

Western Telematic has long been at the forefront of innovative telecom solutions, and their offerings, such as the PTS-8NE15-1 and PTS-9CM20-2, exemplify this tradition of excellence. These two models reflect advanced design principles tailored to meet the growing demands of network management, remote monitoring, and access control.

Starting with the PTS-8NE15-1, this model is designed for versatile network control applications. It features eight network-enabled ports, allowing users to manage multiple network devices seamlessly. One of its key attributes is the integration of intelligent power management, enabling administrators to monitor power usage in real-time and optimize energy consumption efficiently. The PTS-8NE15-1 is equipped with secure access controls to ensure that only authorized personnel can manage the connected devices, enhancing an organization’s security posture. Support for various network protocols, including SNMP, ensures compatibility with existing infrastructure, facilitating easier integration.

In contrast, the PTS-9CM20-2 is designed for high-capacity environments, providing nine channels of management capabilities. This model stands out due to its dual-mode operation, allowing both wired and wireless networking options. This flexibility is crucial for locations where traditional cabling may be challenging or cost-prohibitive. Additionally, the PTS-9CM20-2 supports advanced analytics, providing insights into network performance and device health. Users can configure alerts and notifications based on performance metrics, ensuring proactive maintenance and troubleshooting.

Both models leverage cutting-edge technologies such as embedded web servers and cloud connectivity, enabling remote access and control from virtually anywhere. Users benefit from a user-friendly GUI, allowing even those with limited technical expertise to navigate and manage their network settings effectively.

In summary, the Western Telematic PTS-8NE15-1 and PTS-9CM20-2 are crafted with a keen understanding of modern network demands. Their robust feature sets, powered by the latest technologies, make them ideal choices for organizations looking to enhance their telecommunications infrastructure. Whether managing energy consumption or ensuring secure access, these devices position businesses for success in an increasingly interconnected world.