Front Control Panel and Rear Side Connectors
|
|
| When the OSD Menu is displayed: |
1. | Increase/Decrease Volume (While in the Volume Menu) | ||
|
|
| When the OSD Menu is not displayed: |
|
|
| Increase/Decrease Volume |
2. | MENU Button | Enter/Exit the OSD Menu | |
3. | LED Display | The LED is lit green when in the monitor is in use and orange when | |
|
|
| in |
4. | and | Buttons | When the OSD Menu is displayed: |
|
|
| Highlight a menu option or adjust the value of a selected option |
|
|
| When the OSD Menu is not displayed: |
|
|
| Adjust the backlight brightness |
5.INPUT/OK Button | When the OSD Menu is displayed: | ||
|
|
| Select a menu option |
|
|
| When the OSD Menu is not displayed: |
|
|
| Switch the signal input between analog and digital |
6. | Power Button | Power On/Off | |
7. AC Power Connector | Use the AC power cord to connect the monitor to a grounded AC | ||
|
|
| outlet. |
8. Audio In |
| Use the 3.5mm audio cable to connect to your PC Audio Output. | |
9. | Digital | Use a | |
|
|
| |
|
|
| output capability. |
10. Analog VGA Connector | Use an analog VGA cable (not included) to connect to your | ||
|
|
| PC VGA Output. |
11. Ventilation Openings | Note: Do not block the ventilation openings. This may cause the | ||
|
|
| monitor to overheat or malfunction. |
12. Security Lock Anchor | Secure the LCD monitor by using a Kensington Micro Saver Security | ||
|
|
| Lock. |
7