Westinghouse LCM-17v2 manual Installation, Attach Base Stand to the LCD Monitor, Connect VGA Cable

Page 7

Installation

Congratulations on your purchase of a Westinghouse 17” LCD Monitor. Sleek and practical, this lightweight and wall-mountable LCD Monitor delivers a crisp and clear display optimized for 1280 x 1024 display resolution.

Package Contents

LCD Monitor includes:

•LCD Display

•LCD Base Stand Attachable

•Cables

oDC Power Adapter Supply

oAC Power Adapter Cord

oVGA (HD15) Male – Male Cable

o3.5 mm Male – Male Stereo Audio Cable

•Literature

oUser’s Manual

oWarranty Card

Important

Save the original box and all packing material for future shipping needs.

1. Attach Base Stand to the LCD Monitor

Attach the Base Stand to the LCD Monitor stand neck. Align the holes and tabs; press in and snap into place.

2. Connect VGA Cable

Connect VGA and audio cables from your PC to the back panel of the LCD Monitor.

3. Connect Power Cables

Connect the DC power adapter cord to the LC Monitor and then connect female AC power cord to the adapter. Plug the AC power cord into a properly grounded AC outlet.

4. Turn Power On

Press the power button on the front of the LCD Monitor display. LED light will turn green if signal input is detected, orange if no signal

.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Table of Contents Ventilation Power Cord ProtectionProper Positioning of Monitor Overloading OutletsOther Notices and Precautions Disclaimer Cleaning the LCD DisplayTo clean the screen To clean the caseFCC Compliance Statement Safety GuidelinesFor the United States and Canada Attach Base Stand to the LCD Monitor InstallationConnect Power Cables Turn Power OnOSD Menu Functions OSD Menus Sub-Menus Description and Function of operation Display Modes Direct Control Keypad ButtonsAuto Input Source Not Found Image not DisplayedOut of Range Appendix SpecificationsNo power TroubleshootingHow do I find more help?
Top Page Image Contents