Installation, Connect the Power Cable

Installation

Congratulations on your purchase of a Westinghouse 15” LCD monitor. Sleek and practical, this lightweight and wall-mountable LCD monitor delivers a crisp and clear display optimized for 1024 x 768 resolution.

Package Contents

•LCD Monitor (15”)

•Detachable LCD Base Stand

•Cables

oAC/DC Power Supply Adapter and Cord

oVGA (HD15) Male – Male Cable

o3.5 mm Male – Male Stereo Audio Cable

•Literature

oUser’s Manual

oWarranty Card

1.Attaching the Base Stand to the LCD Monitor

Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in and snap into place. To remove the base stand, press the tabs on the bottom of the stand neck and remove the base.

2. Connect the VGA and Audio Cables

Connect a VGA cable (to the connector labeled “D-SUB”) and an audio cable (to the connector labeled “LINE-IN”) from the back panel of the LCD monitor to your PC.

3. Connect the Power Cable

Connect the DC power adapter cord to the monitor (to the connector labeled “DC-IN”) and then connect the female AC power cord to the adapter. Plug the AC power cord into a properly grounded AC outlet.

4. Turn the Power On

Press the power button on the front of the LCD monitor. The LED light will turn green if a signal input is detected or it will be orange if no input is detected.

Auto Adjust

Although a computer can detect the new monitor with the built-in VESA Plug & Play feature, the Auto Adjust function can be used to enhance the display. To perform the Auto Adjust:

Turn on the computer and monitor. Press the “Auto” button to start Auto Adjust. The LCD monitor will perform the Auto Adjust process automatically for 10 seconds and you will notice the image change after it has been adjusted.