Westinghouse LCM - 19v1 manual Troubleshooting, No Power

Page 13

Troubleshooting

No Power

Make sure the DC cord is plugged into the back of the LCD monitor.

Make sure the AC power cord is securely connected to the AC socket.

Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage.

No Image

Make sure the power button is ON.

Check whether the LCD monitor and computer power cords are plugged in and check the power supply.

Power is ON but No Screen Image

Adjust the brightness and contrast levels.

Make sure the VGA cable is securely connected to both the computer and monitor.

“Out Of Range”

Check the computer image output resolution and frequency and compare the value with the preset values of the computer’s graphics card.

Fuzzy Image

Adjust the Phase setting on the monitor.

Image Too Bright or Too Dark

Adjust the brightness and contrast levels using the OSD.

Make sure that the computer is not displaying an irregular image.

Check the VGA connection between the computer and LCD monitor.

Perform Auto Adjust.

Distorted Image

Reset the LCD monitor by performing the “Recall” function using the OSD.

Remove extra accessories (such as a VGA extension cord).

Image is Not Centered (size is not scaled correctly)

Perform Auto Adjust

Adjust the horizontal and/or vertical position using the OSD.

Check image size setting.

Colors are Not Correct

Adjust the color setting using the OSD.

No Sound

Check the audio connection.

12

SE-UM-1901-0502

Image 13
Contents Page Table of Contents Proper Handling of the Monitor Power Cord ProtectionOverloading Outlets VentilationOther Notices and Precautions To Clean the Screen Cleaning the LCD MonitorTo Clean the Case DisclaimerFCC Compliance Statement Safety GuidelinesFor the United States and Canada Connect Power Cables InstallationTurn the Power On Attaching the Base Stand to the LCD MonitorOSD Menu Functions OSD Menu Sub-Menu Description and Function Display Modes Backlight ControlNo Signal Input Image ProblemOut of Range Appendix SpecificationsNo Power TroubleshootingMounting the LCD Monitor on a Wall SE-UM-1901-0502