TV Operations
Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency.
1.Press BND button # and select the desired band (TV1 or TV2).
∗If “MANU” is not lit in the display, press and hold BND button # for 1 second or longer. “MANU” lights in the display and manual tuning is now available.
2.Tune into a station.
●Quick tuning:
Press and hold the right or left side of SEARCH button % for 1 second or longer to tune in a station.
●Step tuning:
Press the right or left side of SEARCH button
%to manually tune in a station.
Recalling a preset station
Atotal of 12 TV stations can be stored
1.Press BND button # and select the desired TV band (TV1 or TV2).
2.To recall a stored TV station, press the de- sired Preset button 9 to select that station.
∗Press and hold one of the Preset buttons 9 for 2 seconds or longer to store the current sta- tion into the preset memory.
Manual memory
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of the Preset buttons 9 for 2 seconds or longer to store the current station to that preset memory.
Auto store
Auto store selects 6 TV stations automatically and stores each one into a preset memory.
If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory.
1.Press BND button # and select the desired TV band (TV1 or TV2).
2.Press and hold AS button 5 for 2 seconds or longer. The stations with good reception are automatically stored to the Preset buttons 9.
Preset scan
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for desired TV station in memory.
1.Press PS button 5.
2.When the desired station is found, press PS button 5 again to remain tuned to that station.
Note:
•Do not press and hold PS button 5 for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.
Setting the TV diver
You can change the reception setting for the TV antenna connected to the TV tuner.
1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button
% to select “TV DIVER”.
3.Press ENT button 2.
4.Turn the Rotary knob & clockwise to set to “ON” or counterclockwise to set to “OFF”.
ON:
Sets reception emphasizing the visual.
OFF:
Sets the diver setting to OFF.
5.Press ENT button 2.
6.Press ADJ button 4 to return to the previous mode.
DRX7675z 21