Tyco Electronics 15D1 manual Securing the Base, Advertising Brackets

Page 16

Securing the Base

There are two mounting options for the D-Series touchcomputer. In both cases, the base must be mounted on a horizontal surface.

Option 1: Secure from below. Use the four pretapped holes to secure the touchcomputer from below the mounting surface. The holes are designed to work with ISO metric m6 screws. These screws are not contained in the package, but should be readily available at any hardware store.

Option 2: Secure from top. Use the two through holes to secure the base to the surface.

NOTE: Mounting screws are not provided with the shipment.

Refer to the figure below for the location of the holes. All dimensions are in millimeters.

Option 2 Through holes

Option 1 Pretapped holes

Advertising Brackets

Advertising brackets are provided to allow the user to display paper ads on the back of the D-Series touchcomputer. These brackets are included separately in the accessory box. The maximum size of the advertising material is 220mm X 320mm (8.6” X 12.6”).

15D1 TOUCHCOMPUTER USER GUIDE 11

Image 16

Contents Series Touchcomputer User Guide Elo TouchSystems Series Touchcomputer User Guide E674343 Elo TouchSystems ElotouchDisclaimer Copyright 2010 Tyco Electronics. All Rights ReservedTrademark Acknowledgments Table of Contents Display Screen Specifications Setup Unpacking Your TouchcomputerAdjusting the Display Setting Up the Operating SystemSelect the Regional Options tab 15D1 Touchcomputer User Guide Injecting the Languages For Windows 7 Only Select Repair your computerClick Inject Selected Language Selecting the Region For Windows 7 Only Click Exit Exit RestartSelecting the Update Options For Windows 7 Only Choosing the Computer Name For Windows 7 OnlyTesting Peripherals Reviewing the Time and Date Settings For Windows 7 OnlyCalibrating the Touchscreen Securing the Base Advertising Brackets15D1 Touchcomputer User Guide Operation On-Screen Display OSD OSD MenuOSD and Power Button Control Base Power Status LEDTo enable or disable the OSD function To enable or disable the power button PWR lock functionTouch Power Status LED Head Power Status LEDHDD Activity LED Using the Input/Output Panel 15D1 Touchcomputer User Guide Number Port Description Options and Upgrades Adding Optional PeripheralsMagnetic Stripe Reader MSR Testing in USB MSR Keyboard KB Emulation Mode Testing the MSRTesting in USB MSR Human Interface Device HID Mode Customer Display Feature Specification Fingerprint Reader FPRTesting the FPR Barcode ScannerEnabling 2-D Scanning Testing the Barcode Scanner Click Start Control PanelCOM value USB serial port Param Number Permanent Param Change New Value Wireless Card Testing the Wireless CardTesting the Cash Drawer Port Solid State DriveThird-Party Peripherals Printer PortAdditional Hard Drives Safety and Maintenance SafetyCare and Handling Recovering the Operating System Select OS RecoveryClick Recover Start Recovery Process Weee DirectiveFollowing UI shall be presented After finished, click Exit Exit Restart 15D1 Touchcomputer User Guide USB Serial Port COM5 Change to COM3 Location Information Select Port Settings Click Advanced… Hardware changes Technical Specifications Touchcomputer SpecificationsBios AMI Feature Description Feature Description Printer Power Input Pin Definition Connector SpecificationsSerial Ports Cash Drawer Port Specifications Serial Port Power SelectionCash Drawer Port Signal Definition Cash Drawer Port Power SelectionDisplay Screen Specifications Displays an out of range warningDisplay Screen Specifications Environmental Specifications Feature SpecificationUsing the Web Using the TouchcomputerTechnical Assistance Using the Phone Electrical Safety Information II. Emissions and Immunity Information15D1 Touchcomputer User Guide III. Agency Certifications Warranty 15D1 Touchcomputer User Guide Index Page Getting in Touch with Elo