Tyco Electronics ET2200L manual Operation, About Touchmonitor Adjustments

C H A P T E R

3

OPERATION

About Touchmonitor Adjustments

Your touchmonitor probably does not require adjustment. However, variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display.

For best performance, your video source should be at 1680 X 1050 resolution, at 50–75 Hz refresh rate. Operating in other resolutions degrades video performance.

For input video outside the refresh rate and dot clock ranges, the monitor does not automatically adjust, but displays an “Out of Range” (OOR) message and the On-screen Display (OSD) menu, which ordinarily allows you to change monitor settings, is then disabled.

Note: Do not operate the touchmonitor if you see the OOR mes- sage, or LCD damage may result. If you see the OOR message, set the video mode to one within the allowable range.

Elo TouchSystems 2200L User Guide 15