VBrick Systems ETV v3.1 manual To Configuration System Securit y IWS Server Port

Administration

3.In Select VBrick, select one or more existing VBricks for which a SAP has been received. If you select one VBrick, this populates the VBrick Configuration panel. (If you select multiple VBricks, it does not populate the panel; if you need to configure the VBricks, you must add them one at a time.)

4.Complete or modify the fields in VBrick Configuration as necessary and click Submit. This adds the new configuration to the list of configured VBricks shown on the previous page.

Note The only time you will manually complete the VBrick Configuration fields is when you are defining the configuration for a VBrick that will be added to the network at a later time. In this case, you will need to know the configuration data in advance.

Host Name	Required. Host name of VBrick.
IP Address	Required. IP address of VBrick.
User Name	Defaults to system-defined value if blank.
User Password	Defaults to system-defined value if blank.
Confirm Password	Defaults to system-defined value if blank. Must match User Password
	if entered above.
Software Revision	Optional. To get the Software Revision in Integrated Web Server
	(IWS), go to Status > System Information > Release Revision.
HTTP Port	Optional. To get the HTTP Port in Integrated Web Server (IWS), go
	to Configuration > System > Securit y > IWS Server Port.
VBrick Model	Select from dropdown. Advanced settings are enabled if you select an
	encoder or a VBStar.

ETV Portal Server Administrator Guide 21