Telos iPort user manual Section

Page 30

24  Section 3

;publishing outlets. You can use %s anywhere in the title to have the encoder’s option included

;into the final stream name.

;SourceNameFormat=%s powered by Steamcast

;SourceIsDefault [*YesNo]: Setting this to Yes will make this particular

;mount available globally. There can be only one global mount. This

;is also the only mount that will be able to list at shoutcast.com

SourceIsDefault=Yes

;SourceIP: Setting this to a dotted IP address will make this particular

;mount available at the root of steamcast (much like SHOUTcast) for the IP

;specified here. Note: You must own the IP you place here. Inaccurate

;settings will have no effect. This setting essentially will allow you to

;list multiple source points in the SHOUTcast directory. It is not neccessary

;to set this setting if you only own one IP. Setting this for any Source will

;disable the SourceIsDefault flag on any mount.

;SourceIP=123.45.67.89

;SourceAuth: [Yes*No]: Allows you to setup HTTP Basic Authorization on this

;mount point. All Authentication is currently file based. Please see steamauth.txt

;SourceAuth overrides the public bit and will force all SourceAuth’d streams to be

;private.

;SourceAuth=No

;SourceAuthMax: [*0]: Allows you to set the maximum amount of connections per

;authenticated

;user. A setting of 0 is interpreted as unlimited.

;SourceAuthMax=0

;SourceListenerTimer: [*0]: Allows you to specify the amount of time a client can stay

;connected in minutes. A value of 0 disables this feature and allows clients to stay connected

;for an unlimited amount of time.

;SourceListenerTimer=0

;SourcePublic: [*DefaultAlwaysNever]: Allows you to specify whether to override the source’s

;public bit setting. When set to Always a source mount will list on directory services regardless

;of the encoder’s specified preference. When set to Never the source mount will refuse to list on

;directory services. The default of... Default (heh) sets the source to let the encoder decide

;listing preference.

;SourcePublic=Default

;SourcePublicRelays: [*YesNo]: Whether servers which relay steamcast should list on directory

Image 30
Contents Telos iPort We support you TrademarksTelos Systems USA Telos EuropePage Table of Contents Telos iPort manual  Introduction Welcome to the iPortInstallation Features & BenefitsConnections Web User Interface Front Panel LCDInitial Start-Up Livewire port Host NameWAN port Firmware Upgrade Backing-up and Restoring ConfigurationReset Changing PasscodesMixer and V-Mode To Learn MoreLivewire-WAN Link Configuring the iPort Getting StartedNetwork Global Options Codec configurationCodec and Channel Settings EncoderDiagnostics and Troubleshooting DecoderCan I use the iPort with codecs from other manufacturers? FAQsDoes the iPort conform to the ITU N/ACIP specification? What about firewalls?Will the iPort work over the public Internet? Page Streaming Configuring the iPort for Streaming STreaming  Streaming Servers SteamcastInstalling and Using Steamcast Steamcast ConfigurationSection STreaming  Section STreaming  Section STreaming  Section STreaming  Section SHOUTcast Web InterfaceWindows 95/98/ME/NT/2000/XP Stream and Track Names Configuration FileICEcast UNIX, LINUX, FreeBSD and MAC OSXUsing a PC Player to Listen Hardware PlayersMpeg License & Music Copyright Copyright Office