Hardware Installation
1.Turn Off the power to your computer.
2.Unplug the power cord and remove your computer’s cover.
3.Remove the slot bracket from an available PCI slot.
4.To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly.
5.Replace the slot bracket’s holding screw to secure the card.
6.Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® XP/2000
Windows® XP/2000 will automatically detect and install the correct driver for the
However, please ensure you have the latest Service Pack Installed.
For Windows® XP
zWindows® XP Service Pack 1 or later For Windows® 2000
zWindows® 2000 Service Pack 4 or later
For Windows® Server 2003/Vista
Page 4 |