Crosley CR74-S Getting Started, Turntable Operation, Unpacking, Power Source, Tone Arm Adjustment

10 Move the TURNTABLE SWITCH (28) to “AUTO”. The switch will automatically return back to the “ON” position and the first record will drop. The TONE ARM (25) will automatically lift and move to the beginning of the record. Once the first record is finished, the TONE ARM (25) will move back to the TONE ARM REST (27) and the next record will drop. The TONE ARM (25) will move back to the beginning of the record. This will repeat until the last record is finished. When the last record is finished, the TONE ARM (25) will return to its rest and the turntable will shut off.

11 To manually switch to the next record during playback, move the TURNTABLE SWITCH (28) to the “AUTO” position. The next record will drop and begin to play.

Flip the needle cover up.

9

Turntable Features

1 Selectable 33/45/78 rpm speeds.

2 Load up to 6 records at a time.

3 Plays 7”, 10”, and 12” records.

4 Record changer is fully automatic or can be operated manually.

Turntable Instructions

1 Turn power on by pressing POWER BUTTON(6).

2 Rotate the FUNCTION SWITCH (18) to PHONO mode.

3 Lift TENSION ARM (24) and rotate counter- clockwise over the TONE ARM (25).

4 Load desired records on the CENTER SPINDLE (23). Records should be loaded one at a time.

5 Lift TENSION ARM (24) and rotate it clockwise over the records and release. TENSION ARM

(24) will automatically pull down onto the records.

6 Set the SIZE SELECT SWITCH (26) to the correct size of your records.

7 Set the SPEED SELECT SWITCH (29) to the correct speed of your records.

8 Move the TURNTABLE SWITCH (28) to the “ON” position. Turntable will begin to turn.

Getting Started

Unpacking

1 Remove packing materials from unit.

Note: Save all packing materials.

2 Remove plastic bag covering unit.

3 Remove plastic safety cover form A/C PLUG

(35)

4 Remove tie from A/C Cord and untie ANTENNA WIRE (34) on the back of Radio.

5 Open lid and remove styrofoam shipping material from turntable.

6 Remove black tie-wrap from under the tone arm.

7 Using your Fingers,Turn the Turntable Suspension Screw (22) clockwise until it is all the way down. Do not force it. This allows turntable to float on its shock absorbers.

8 Remove the protecting Rubbers form the turntable.

6

Power Source

1 Unwind the AC POWER CORD (35) at the back of the unit and connect it to a power outlet.

2 Plug A/C cord into appropriate outlet.

AC

Polarized Plug

3 This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature, If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact you electrician to replace your obsolete outlet. Do not defeat the purpose of the polarized plug.

Turntable Operation

12 To stop playback manually, move the TURNTABLE SWITCH (28) to the “OFF” position. Gently lift the TONE ARM (25) from the record and return it to the TONE ARM REST (27).

13 To remove the records from the turntable, lift the TENSION ARM (24) up and rotate it counter- clockwise over the TONE ARM (25). Grab the edges of the bottom record and lift straight up.

Tone Arm Adjustment

1

2

Do not turn

3

1 Adjust this screw if the TONE ARM(25) is not raising high enough to clear to the TONE ARM REST(27). Turn the screw counter-clockwise to raise the height. Turn the screw clockwise to lower the height.

2 Adjust this screw if the TONE ARM(25) drops on the record too early or too late. Turn the screw counter-clockwise to start at a later point. Turn the screw clockwise to start at an earlier point.

3 Adjust the screw if you feel there is not enough tone arm pressure on the record. Turn the screw counter-clockwise to increase pressure. Turn the screw clockwise to descrease the pressure.

Note : Adjust the screws one turn at a time and check the adjustment after each turn.

7