Introduction
UNICOM’s DYNA-SWITCH/24 (Rev. 2.0) is a 24-port 10/100BASE-TX Switch that can be used to build high-performance switched workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed networking and is targeted at workgroup, department or backbone computing environments in SME (small, medium enterprise) businesses.
The DYNA-SWITCH/24 (Rev. 2.0) Switch features a “store-and-forward
“switching scheme. This allows the switch to auto-learn and store source address on a 4K-entry MAC address table. It also supports Class of Service functions. No manual configuration is necessary. The CoS function is included in the switch firmware and will operate automatically when the switch is on.
Features
νConforms to IEEE 802.3, 802.3u, and 802.3x
ν24-port 10/100Base-TX Switch with Auto-MDIX
νIEEE 802.3x flow control support
←Flow control on full-duplex
←Back pressure on half-duplex ν N-Way Auto-Negotiation supported
ν Store-and-Forward switching architecture ν No-blocking full wire speed
ν Embedded 1.25Mbits memory buffer ν Support IEEE802.1p Class of Service ν 4K-entry MAC address table
ν 4.8 Gbps switch back-plane ν 19” standard size
1