Vector VEC021ST owner manual Important Information

Page 10

4

NOTE: The Start-It Jumpstart System is equipped with an audible Reverse Polarity Alarm. This feature is only active when the Safety Switch is turned OFF. After both battery clamp connections are made during jump-start procedures, if you hear a buzzing sound, DO NOT TURN ON THE SAFETY SWITCH. You must swap the clamp connections before continuing. If the buzzer does not sound, it is safe to turn on the Safety Switch and follow the Jumpstart procedure.

NOTE: The alarm requires at least two volts to operate, so in the rare instance of a totally dead battery, the alarm may not sound if the polarity connection is reversed. This is very unlikely because almost all dead batteries rarely go below four or five volts. Always double-check your connections before turning on the Safety Switch.

IMPORTANT INFORMATION:

CAUTION: READ INSTRUCTION MANUAL AND PRODUCT LABELING CAREFULLY, FOR COMPLETE INSTRUCTIONS, BEFORE USING THIS PRODUCT. FOLLOW RECOMMENDED WARNINGS, CAUTIONS, SAFETY PROCEDURES, AND MANUFACTURER GUIDELINES FOR YOUR VEHICLE’S BATTERY.

1.IMPORTANT: ALTHOUGH THIS UNIT IS DELIVERED IN A PARTIALLY-CHARGED STATE—YOU MUST FULLY CHARGE IT WITH THE SUPPLIED 110/120-VOLT AC CHARGER FOR A FULL 24 HOURS, BEFORE USING IT FOR THE FIRST TIME.

2.IMPORTANT: DO NOT OVERCHARGE UNIT, THIS WILL REDUCE BATTERY LIFE. CHARGE UNTIL GREEN “CHARGED” INDICATOR IS LIT WHEN CHARGE STATUS BUTTON IS PRESSED. AFTER GREEN “CHARGED” INDICATOR LIGHT COMES ON WHEN CHARGE STATUS BUTTON IS PRESSED, UNIT CAN BE TOP-OFF CHARGED FOR AN ADDITIONAL HOUR USING THE DC METHOD OR 2-4 HOURS USING THE AC METHOD.

3.FULLY RECHARGE UNIT AFTER EACH USE, OR WHEN CHARGE STATUS INDICATOR SHOWS LOWER THAN 4 RED LED, AND EVERY 2 MONTHS WHEN NOT IN USE.

4.ALWAYS RECHARGE IN A DRY, WELL-VENTILATED AREA, AWAY FROM WATER.

5.WHEN CHARGING IN ANY WET OR DAMP AREA FROM A 110/120-VOLT ELECTRICAL OUTLET, MAKE SURE THAT THE OUTLET USED IS PROTECTED BY A GROUND FAULT CIRCUIT INTERRUPT (GFCI) CIRCUIT.

6.WHEN CHARGING THE UNIT NEAR WATER (POOL, DOCKSIDE, BEACH, ETC.) DO NOT ALLOW THE

ELECTRICAL CORDS AND OUTLETS TO GET WET OR COME NEAR WATER — ELECTRICAL SHOCK COULD RESULT!

7.USE ONLY THE SUPPLIED CORDS FOR RECHARGING/OPERATING THIS UNIT.

8.IT IS RECOMMENDED THAT UNIT BE KEPT UPRIGHT DURING USE AND WHEN RECHARGING.

9.WHEN NOT IN USE, STORE UNIT WITH ON/OFF SWITCH TURNED OFF.

SAFETY WARNINGS:

1.THERE IS A RISK OF EXPLOSIVE GASES BEING RELEASED WHEN BATTERIES ARE IMPROPERLY CHARGED OR DISCHARGED. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PROPERTY DAMAGE, EXPLOSIVE HAZARD AND/OR PERSONAL INJURY.

2.ALWAYS USE PROTECTIVE EYEWEAR WHEN USING THIS PRODUCT: CONTACT WITH BAT- TERY ACID MAY CAUSE BLINDNESS AND/OR SEVERE BURNS.

3.KEEP OUT OF REACH OF CHILDREN!!

4.ALWAYS STORE BATTERY CLAMPS IN BUILT-IN HOLSTERS WHEN NOT IN USE. NEVER TOUCH BATTERY CLAMPS TOGETHER – THIS CAN CAUSE DANGEROUS SPARKS, POWER ARCING, AND/OR EXPLOSION.

FIRST AID:

1.SKIN:IF BATTERY ACID COMES IN CONTACT WITH SKIN, RINSE IMMEDIATELY WITH WATER, THEN WASH THOROUGHLY WITH SOAP AND WATER. IF REDNESS, PAIN, OR IRRITATION OCCURS, SEEK IMMEDIATE MEDICAL ATTENTION.

2.EYES: IF BATTERY ACID COMES IN CONTACT WITH EYES, FLUSH EYES IMMEDIATELY – FOR MINIMUM OF 15 MINUTES — SEEK IMMEDIATE MEDICAL ATTENTION.

Image 10
Contents Includes Instructions for 110 Volt AC Power Inverter Option START-ITTable of Contents Year Limited Warranty Program Page First AID That MAY Result in Personal Injury or Loss of LifeBattery Replacement Battery DisposalBattery Disposal EMERGENCY/WORK LightOperation as a 110 Volt AC Power Supply Operation AS a Portable Power SupplyOperation as a 12-volt DC Power Supply Estimated 12-Volt DC Usage TimesFeatures Important Information Estimated Battery Life Cycles110/120-Volt AC Charging CHARGING/RECHARGINGFirst AID 12-Volt DC ChargingIntroduction Operate 12-volt DCUsing the START-IT AS a Jumpstart System EASY, STEP-BY-STEP Jumpstarting InstructionsPositive Ground Systems 4140 S.W th Way Ft. Lauderdale, FL

VEC021ST specifications

The Vector VEC021ST is an advanced electric vehicle (EV) charging station designed to meet the growing demand for convenient and efficient charging solutions. With its robust build quality and innovative technologies, the VEC021ST stands out as a reliable option for both commercial and residential environments.

One of the primary features of the VEC021ST is its high charging capacity. It supports Level 2 charging, delivering power output of up to 22 kW, which significantly reduces charging time compared to standard chargers. This means electric vehicle owners can quickly recharge their vehicles, making it particularly appealing for businesses that wish to provide charging for customers or employees. Its compatibility with various electric vehicle models ensures broad usability, enhancing convenience for all EV drivers.

The design of the VEC021ST is another notable characteristic. It features a sleek, modern aesthetic that fits seamlessly into any environment. The unit is weather-resistant, allowing it to function effectively in various outdoor conditions, whether rain or shine. Additionally, its compact size enables easy installation in both public charging stations and private garages without taking up excessive space.

Technology-wise, the VEC021ST is equipped with smart connectivity features. It supports Wi-Fi and Ethernet connections, allowing users to monitor charging status and control settings via a mobile app or web interface. This connectivity also enables software updates and provides valuable data analytics to track usage patterns, helping operators optimize charging station performance.

Safety is a paramount consideration in the design of the VEC021ST. The unit includes multiple safety features such as overcurrent protection, short circuit protection, and ground fault protection, ensuring a safe charging experience for users. Additionally, the built-in RFID reader enhances security, allowing only authorized users to access the charging station.

For businesses implementing charging solutions, the VEC021ST can be integrated into existing energy management systems. This capability allows for better control of energy consumption and cost management, aligning with sustainability goals.

In conclusion, the Vector VEC021ST encapsulates the essence of modern EV charging technology, combining high performance, user-friendly features, and robust safety measures. Its versatility and ease of installation make it a compelling choice for anyone looking to enhance their electric vehicle charging capabilities. As the EV market continues to grow, the VEC021ST stands ready to power the future of sustainable transportation.